Panasonic PTVZ570 Operating Guide

7)  Press asqw to adjust the item.

1)  Press asqw to adjust.

 

f

For details, please refer to [KEYSTONE] in [SCREEN ADJUSTMENT] menu. (

Æ

 page 56) 

Press the q button. The top and bottom of horizontal line 

will be bulge.

Press the w button. The top and bottom of horizontal line 

will be dent.

Press the a button. The left and right of vertical line will be 

dent.

Press the s button. The left and right of vertical line will be 

bulge.

 

f

One of [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] setting value is valid. When [KEYSTONE], 

[CORNER CORRECTION] or [CURVED CORRECTION] adjustment is finished, you adjust the others, the adjusted value 

will be reset.

 

f

Press the <SCREEN ADJ> button on the remote control when the [KEYSTONE], [CORNER CORRECTION] or [CURVED 

CORRECTION] screen is displaying, it will switch to the next adjustment screen.

 

f

When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next 

corner can also be displayed by pressing the <ENTER> button.

 

f

Correcting up to ±35° for the tilt in the vertical direction and ±35° for the tilt in the horizontal are available for adjustments 

with [KEYSTONE]. However, the image quality will degrade and it will get harder to focus with more correction. Install the 

projector so that the correction will be as small as possible. 

 

f

Screen size will also change when [KEYSTONE] is used to perform various adjustments.

 

f

Aspect ratio of the image size may shift depending on the correction.

You can correct the trapezoidal distortion and the curved distortion of the projected image.

1)  Press as to select [SCREEN ADJUSTMENT].
2)  Press the <ENTER> button.

 

f

The [SCREEN ADJUSTMENT] screen is displayed.

3)  Press as to select one item to adjust.

Adjusts when the trapezoid of the projected image is distorted.

[CORNER CORRECTION] Adjusts when the four corners of the projected image are distorted.

[CURVED CORRECTION] Adjusts when the linearity is not uniform or the projected image is curved distortion.

1)  Press as to select [SCREEN ADJUSTMENT].
2)  Press the <ENTER> button.

 

f

The [SCREEN ADJUSTMENT] screen is displayed.

3)  Press as to select [KEYSTONE].
4)  Press the <ENTER> button.

 

f

The [KEYSTONE] individual adjustment screen is displayed.

ENGLISH - 57