Panasonic KX-P8420 Installation Guide
2
4) Press the “
3” button until “AppleTalk Setup” is displayed.
5) Press “Enter” and “Enable AppleTalk” is displayed.
6) Press “Enter” then press “
6) Press “Enter” then press “
3” to change “No” to “Yes”.
7) Press “Enter” and “AppleTalk Zones” is displayed.
8) Press “Enter” again and the printer will search for any
8) Press “Enter” again and the printer will search for any
AppleTalk zones.
9) Press “Menu” when the printer finishes searching for the
AppleTalk zones. (There may not be any for it to find)
Preparing the Mac to Print to the KX-P8420 or KX-PS8100
Enabling EtherTalk on the Mac
1) Click and hold the Apple icon at the top left corner of the
display.
2) Slide the pointer down the pop-up menu to “Control Panels”.
3) Slide the pointer over to the new pop-up menu and select
3) Slide the pointer over to the new pop-up menu and select
“Network”.
4) The default AppleTalk connection will be highlighted. If
EtherTalk is not highlighted, double click on the EtherTalk
icon to select it.
icon to select it.
Installing the driver on the Mac
1) Insert the CD labeled “Printer Driver and Utilities” into the
CD-ROM drive, label side up, and close the drive. A
“Panasonic KX-P8420” or “Panasonic KX-PS8100” window
is automatically displayed.
“Panasonic KX-P8420” or “Panasonic KX-PS8100” window
is automatically displayed.
2) Within the Panasonic Window double click on the “English”
folder. A window containing the “English” contents is
displayed.
displayed.
3) Double click on the Adobe_PS icon and a window containing
the contents of the Adobe_PS folder is displayed.
4) Double click on the “Installer” icon. A warning window is
displayed stating that the Mac will need to be restarted after
the installation process. Click “yes” to continue.
the installation process. Click “yes” to continue.
5) After the installation process a window is displayed asking to
restart the Mac. Click “Yes” to restart the Mac.