Panasonic sa-da20 Operating Guide
Enjoying the sounds
18
RQT5861
1
Press [
8
].
2
Press [A] or [BI-WIRE].
“SURROUND” and “SFC” do not work if you select “B”.
A, B and BI-WIRE refer to the speaker terminals on the rear
of the unit.
of the unit.
3
Turn [INPUT SELECTOR] to select the
input source.
input source.
To switch between analogue and digital input
(CD, DVD, and TV)
(CD, DVD, and TV)
Press [DIGITAL INPUT].
Each time you press the button:
ANALOG
Each time you press the button:
ANALOG
,
/
DIGITAL
The indicator lights when you select “DIGITAL”.
Once you have set the mode for a source, that mode is
engaged whenever you select that source.
Once you have set the mode for a source, that mode is
engaged whenever you select that source.
4
Select the DSP sound mode.
1
1
Press [DSP SOUND MODE].
The indicator corresponding to the mode lights.
Select the mode appropriate to the source (
The indicator corresponding to the mode lights.
Select the mode appropriate to the source (
\
pages 16, 17).
2
2
When you select “SFC”
Press [SFC] on the remote control.
Press [SFC] on the remote control.
Once you have set the mode for a source, that mode is
engaged whenever you select that source.
engaged whenever you select that source.
5
Start playing the source.
Refer to the equipment’s instructions for details.
6
Adjust the volume.
When you finish listening
Be sure to reduce the volume and press [
8
] to switch the unit to
standby.
For your reference
¡
If you are using a VCR (connected to VCR 1) and you select
TAPE/MD, CD, TUNER, or PHONO
The picture will remain on the screen.
TAPE/MD, CD, TUNER, or PHONO
The picture will remain on the screen.
¡
The signal format indicators
The following indicators light depending on the source you are
playing.
The following indicators light depending on the source you are
playing.
%
DIGITAL:
Dolby Digital sources
:
DTS sources
%
PRO LOGIC:
Analogue sources in SURROUND mode
Digital sources with PCM signals in SURROUND mode
Dolby Digital sources that contain Dolby Pro Logic in
SURROUND mode
Digital sources with PCM signals in SURROUND mode
Dolby Digital sources that contain Dolby Pro Logic in
SURROUND mode
¡
The program format indicators (L, C, R, LS, S, LFE, RS)
The program format indicators light up to indicate the channels
contained in the digital input signal. They do not light when input
is analogue.
L: Front channel (left)
C: Center channel
R: Front channel (right)
LS: Surround channel (left)
RS: Surround channel (right)
S: If the surround channel is monaural.
LFE (Low Frequency Effect): Deep-bass effect.
contained in the digital input signal. They do not light when input
is analogue.
L: Front channel (left)
C: Center channel
R: Front channel (right)
LS: Surround channel (left)
RS: Surround channel (right)
S: If the surround channel is monaural.
LFE (Low Frequency Effect): Deep-bass effect.
1
2
3
4
6
SPEAKERS
A
B
BI-WIRE
INPUT SELECTOR
1
2
DSP SOUND MODE
SFC
MAX
VOLUME
MIN
SPEAKERS
A
PROGRAM FORMAT
DIGITAL
SOUND MODE
SURROUND
L
C
R
LS
LFE
RS
1
6
4
-
3
2
DIGITAL INPUT
1
DVD 6CH
DIGITAL
3
6
2
5
1
4
SFC
9
8
7
DELAY
0
DISC ENTER/
DECK 1/2
≥
10/-/--
LEVEL
CANCEL
SETUP
PLAY MODE
ANGLE
AUDIO
SUB TITLE
REPEAT
MODE
A-B
REPEAT
GROUP
TEST
DIMMER
PAGE
DVD
4
-
2