Panasonic sa-da20 Operating Guide
Making a recording
27
RQT5861
Other
s
¡
You cannot record a source connected through a digital terminal.
When recording CD, DVD, or TV, ensure the source is connected
through the corresponding analogue terminals (
When recording CD, DVD, or TV, ensure the source is connected
through the corresponding analogue terminals (
\
pages 6, 7)
and “ANALOG” input is selected (
\
page 18).
¡
When you select DVD 6CH INPUT mode, only sound from the
front left and right channels is recorded.
front left and right channels is recorded.
Note
You can record to equipment connected to TAPE/MD REC (OUT)
or to a VCR connected to VCR 1 OUT.
See the recording unit’s operating instructions for details on how to
prepare it for recording.
When recording with a tape or MD deck, you can record any source
except TAPE/MD.
When recording with a VCR, you can record any source except
TAPE/MD or VCR 1.
or to a VCR connected to VCR 1 OUT.
See the recording unit’s operating instructions for details on how to
prepare it for recording.
When recording with a tape or MD deck, you can record any source
except TAPE/MD.
When recording with a VCR, you can record any source except
TAPE/MD or VCR 1.
1
Turn [INPUT SELECTOR] to select the
source to be recorded.
source to be recorded.
2
If you selected “VCR 2” in step 1, set
[
[
l
VCR 2,
k
VCR 3] to the required
position.
3
Begin recording.
Follow your recording unit’s operating instructions.
4
Begin the source to be recorded.
Follow your equipment’s operating instructions.
Recording on a tape or MD deck
or VCR
or VCR
A
To monitor sound being recorded onto a tape deck
B
It is possible to check the sound being recorded if your tape deck is
a 3 head system.
a 3 head system.
Press [TAPE MONITOR] on this unit and
set the monitor button on the tape deck to
“TAPE”.
set the monitor button on the tape deck to
“TAPE”.
Press [TAPE MONITOR] once again to turn it off.
2
1
TAPE MONITOR
1
2
A
B
INPUT SELECTOR
VCR 2
VCR 3
VCR 3
TAPE MONITOR