Panasonic sa-da20 Operating Guide

RQT5861

Do not place anything on top of this unit or block the heat
radiation vents in any way. In particular, do not place tape decks
or CD/DVD players on this unit as heat radiated from it can
damage your software.

Set the unit up on an even surface away from direct sunlight, high

temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life.

Do not place heavy items on the unit.

Do not use high voltage power sources. This can overload the

unit and cause a fire.

Do not use a DC power source. Check the source carefully when

setting the unit up on a ship or other place where DC is used.

Ensure the AC mains lead is connected correctly and not

damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC

mains lead can cause electric shock.

Do not handle the plug with wet hands. This can cause electric

shock.

Do not let metal objects fall inside the unit. This can cause

electric shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock

or malfunction. If this occurs, immediately disconnect the unit from
the power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain

flammable gases which can ignite if sprayed into the unit.

Do not attempt to repair this unit by yourself. If sound is

interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these operating instructions occurs,
disconnect the AC mains lead and contact your dealer or an
authorized service center. Electric shock or damage to the unit can
occur if the unit is repaired, disassembled or reconstructed by
unqualified persons.

Extend operating life by disconnecting the unit from the power

source if it is not to be used for a long time.