Panasonic MW-10 Operating Guide
23
RQT9504
Ref
erence
Specifi cations
AMPLIFIER SECTION
RMS Output Power
Stereo mode
Both ch driven 5 W Per channel
6
Ω, 1 kHz, 10 % THD
Total RMS Stereo mode power: 10 W
Input and Output
terminal
Headphone: stereo mini plug (3.5 mm)
Used Headphone impedance:
16 to 64
Ω
iPod: iPod special terminal
USB: USB 2.0 High speed
FM TUNER SECTION
Preset Memory
30 stations
Frequency range
87.50 to 108.00 MHz (50 kHz steps)
Sensitivity
16.3 dBf (1.8 μV, IHF’58)
Antenna terminals
75
Ω (unbalanced)
AM TUNER SECTION
Preset Memory
15 stations
Frequency range
(For the United Kingdom,
continental Europe, Australia, New
Zealand, Russia and Ukraine, etc.)
522 to 1629 kHz (9 kHz steps)
(For Thailand and others)
522 to 1629 kHz (9 kHz steps)
520 to 1630 kHz (10 kHz steps)
Sensitivity
(S/N 20 dB)
500 μV/m
CD SECTION
Beam source
Semiconductor laser
Wavelength
795 nm
Number of channels 2 channels (Stereo)
Wow and fl utter
Wow and fl utter
Below measurable limit
Playable disc
CD, CD-R, CD-RW
Playable format disc CD-DA
INTERNAL MEMORY SECTION
Mounted capacity
4 GB
Maximum number of records in
internal memory : about 8000.
Number of records is estimated
with compressed data when
recording. Number of records is
different by the picture data.
AC ADAPTOR SECTION
Input
AC 110 V to 240 V, 36 W, 50/60 Hz
Output
DC 12 V, 2000 mA
PHOTO SECTION
LCD size
9 inch
Aspect ratio
16:9
Use File format
(CD/SD/Internal
memory)
JPEG: Exif 2.2, JFIF
Progressive JPEG No Support
4:2:0, 4:2:2, 4:4:4 type base line
JPEG
•
Maximum number
of pixels
5120 × 3840
Minimum number of
pixels
64 × 64
Maximum decode
fi le size
10 MB
SPEAKER SECTION
Type
1 way, 1 speaker system
Full range: 4 cm × 2 cone type
Impedance
6
Ω
Input power (IEC)
10 W (Max)
Magnetic-shield design No
Playback frequency
Playback frequency
range
70 Hz to 25 kHz (-16 dB)
120 Hz to 22 kHz (-10 dB)
GENERAL
Dimensions
(W × H × D)
252 mm × 202 mm × 150 mm
Mass
Approx. 1.9 kg
Permissible
operating
temperature
0 ºC to + 35 ºC
Permissible relative
humidity
35 % to 80 % RH (No condensation)
Power consumption in standby mode : Approx. 0.5 W
Without iPod charge.
Specifi cations are subject to change without notice.
Some characters are not displayed on this unit due to the
restrictions of font data.
Since the internal memory includes area that contains
management information such as fi le system, the actual
capacity that can be used is less. Also, the memory
capacity in general is calculated as 1 GB =1,000,000,000
bytes, however, on this unit, it is calculated as 1 GB =
1,024 × 1,024 × 1,024= 1,073,741,824 bytes. Therefore,
the displayed capacity is less than the general value.
Specifi cations are subject to change without notice.
Some characters are not displayed on this unit due to the
restrictions of font data.
Since the internal memory includes area that contains
management information such as fi le system, the actual
capacity that can be used is less. Also, the memory
capacity in general is calculated as 1 GB =1,000,000,000
bytes, however, on this unit, it is calculated as 1 GB =
1,024 × 1,024 × 1,024= 1,073,741,824 bytes. Therefore,
the displayed capacity is less than the general value.
Auto power save: This unit is equipped with the Auto
power save function that automatically reduces the power
consumption when operations such as audio playback,
media insertion/removal, etc. are not performed approx. 10
minutes.
power save function that automatically reduces the power
consumption when operations such as audio playback,
media insertion/removal, etc. are not performed approx. 10
minutes.
The LCD display on the display part is made with high-
precision technology employed, but black dots may
sometimes appear on the LCD display or the display may
always light (with red, blue and green dots). This is not a
malfunction. The pixels on the LCD display are managed
with more than 99.99% of high accuracy, however, the
pixel defi ciency may occur within 0.01% of probability. We
assure you that these dots are not recorded on the SD
card or internal memory.
precision technology employed, but black dots may
sometimes appear on the LCD display or the display may
always light (with red, blue and green dots). This is not a
malfunction. The pixels on the LCD display are managed
with more than 99.99% of high accuracy, however, the
pixel defi ciency may occur within 0.01% of probability. We
assure you that these dots are not recorded on the SD
card or internal memory.
Other names, company names and product names appearing
in this document are the registered trademarks or trademarks
of the respective developer companies. Note that TM or ®
mark does not appear in this document in some cases.
Please note that Panasonic assumes no liability for
indemnifi cation for loss of contents (data) due to some
failures, and direct or indirect damage while this unit is used.
•
•
•
•
•
Tr
oub
leshooting guide / Err
or messa
g
e /
Maintenance / Speci
fi cations
RQT9504-3B_MW-10_EB.indd 23
RQT9504-3B_MW-10_EB.indd 23
2009/09/30 15:16:25
2009/09/30 15:16:25