Panasonic nvvp33 Operating Guide

DVD DISTORTIONS

The player does not respond to

function key commands:

Playback does not start after

pressing PLAY:

Unable to change the audio track or

the subtitle language:

The subtitles are not shown:

The audio track or subtitles do not use

the language selected from the menu:
Unable to change the aspect angle:

Certain control operations are not available with some discs.

There may be interference caused by lightning or static charge.

Press [ ] to put the player into stand-by mode. Restart the player.

You can only choose from the languages actually recorded on the disc.

Some discs require you to change the setting via the Disc menu.

The disc does not provide the language you selected.

It depends on the disc whether this function is available.

You forgot your password:

Stop the player and keep pressing player button

together with

(DVD) and also

until [Initialised] disappears from the screen. This restores all factory defaults. When you are done

switch off the unit and back on afterwards.

Afterwards, display the QUICK SETUP menu to re-initialise the appliance to your preferences.

(VCR)

OPEN / CLOSE

The OSD displays are cut off along

their top edge:

The player cannot play discs of the current format.

The disc contains no recorded material.

The function Ratings is active.

Check the TV Aspect setting.

The loudspeakers emit loud noise:

Go to the Setup screen and check the Audio menu settings of Dolby Digital,

DTS Digital Surround and MPEG.

Before requesting service

Condensation has accumulated inside the player. Wait for 1 to 2 hours.

The player only supports DVDs with regional code 2, All or from a group of regional codes
containing regional code 2.

The disc is dirty or damaged.

The disc is in the wrong way round. The label of the disc you wish to play must face up.

The disc does not provide any subtitles.

You deactivated the display of subtitles.

The subtitles are at the wrong position. Move the position of subtitles.

The message "NO PLAY" appears:

Check whether the AV1 Output is set to [RGB] and change it to [Video].

COMPONENT VIDEO OUT

connection does not work: