Panasonic DMREX645EP Operating Guide
VQT3F54
27
Napredne funkcije
Zaustavljanje snimanja koje je već
započelo
1
Dok je uređaj uključen
Pritisnite [■].
2
Pritisnite [◄,►] da biste odabrali
"Stop Recording" (Zaustavljanje
snimanja) i pritisnite [OK].
Ako zaustavite snimanje mjeračem vremena, ono će se
poništiti. No, ako ste postavili tjedno ili dnevno snimanje
mjeračem vremena, snimanje će započeti sljedeći put kad je
postavljeno snimanje mjeračem vremena.
Poništavanje stanja čekanja na
snimanje na uređaju
Čak i kada je uređaj isključen, možete prikazati popis za snimanje
mjeračem vremena pritiskom na [PROG/CHECK].
1
Pritisnite [PROG/CHECK].
2
Pritisnite [▲,▼] da biste odabrali
program i pritisnite crveni gumb
•
Ikona mjerača vremena “” (→ 30) nestaje s popisa
snimanja mjeračem vremena.
•
Ne možete poništiti stanje čekanja snimanja mjeračem
vremena sve dok je ijedna ikona mjerača vremena “” (→
30) još prisutna na popisu snimanja mjeračem vremena.
•
Ponovno pritisnite crveni gumb da biste aktivirali stanje
čekanja snimanja mjeračem vremena.
Snimanje s automatskim obnavljanjem
Ako snimate program na tvrdi disk svaki dan ili svaki tjedan
mjeračem vremena, uređaj će snimiti novi program preko starog.
Ova se funkcija može koristiti samo kada je odabrano tjedno ili
dnevno snimanje mjeračem vremena.
1
Pritisnite [PROG/CHECK].
2
Pritisnite [▲,▼] da biste odabrali
program i pritisnite [OK].
3
Pritisnite [◄,►] da biste odabrali
stupac "Obnovi".
4
Pritisnite [▲,▼] da biste odabrali
"UKLJ." i pritisnite [OK].
•
Ako je program postavljen za snimanje s automatskim
obnavljanjem zaštićen ili ako se reprodukcija obavlja s tvrdog
diska ili tijekom kopiranja, program neće biti izbrisan. Umjesto
toga program namješten za snimanje bit će spremljen kao odvojen
program te će se njega izbrisati kad nastupi vrijeme sljedećeg
snimanja s automatskim obnavljanjem.
•
Popis za izvođenje (Videozapis) koji je sastavljen od programa koji
su postavljeni za Snimanje s automatskim obnavljanjem izbrisani
su zajedno s automatskim obnavljanjem.
•
Kada nema dovoljno mjesta na tvrdom disku, program se možda
neće snimiti u potpunosti.
Jezik digitalnog odašiljanja s više
zvukova ili više podnaslova
Kad se mjeračem vremena snimaju digitalna odašiljanja s više
zvukova ili podnaslova, jezik zvuka ili podnaslova koji će se snimati
bit će isti kao i onaj postavljen pod "DVB željeni jezik" u Izborniku za
postavljanje (→ 65).
Napomene u vezi sa snimanjem
mjeračem vremena
•
Kada se postavi snimanje mjeračem vremena, DVD-i koji su bili
snimljeni pomoću različitih TV sustava (PAL/NTSC) ne mogu
se reproducirati osim ako se TV sustav promijeni u Izborniku
za postavljanje (→ 69) ili ako je snimanje mjeračem vremena
završeno ili poništeno.
•
Snimanja mjeračem vremena aktivirana su bez obzira na to je li
uređaj uključen ili isključen.
•
Snimanja mjeračem vremena počinju kad je dosegnuto
postavljeno vrijeme čak i tijekom reprodukcije.
•
Snimanja mjeračem vremena ne počinju dok uređujete ili kopirate
u načinu rada uobičajene brzine (→ 51).
•
Ako je uređaj uključen kad započne snimanje mjeračem vremena,
ostat će uključen nakon završetka snimanja. Neće se isključiti
automatski. Možete isključiti uređaj tijekom snimanja mjeračem
vremena.
•
Kada programirate uzastopna snimanja mjeračem vremena
neposredno jedno za drugim, uređaj ne može snimiti početni dio
kasnijih programa.
27
VQT3F54
Ad
van
ced
op
erati
on
s
1
While the unit is on
Press [∫].
2
Press [2, 1] to select “Stop
Recording” and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press the “Red” button.
≥
The timer icon “F” (> 30) disappears from the timer
recording list.
≥
You cannot cancel timer recording standby mode as long as
even one timer icon “F” (> 30) remains in the timer
recording list.
≥
Press the “Red” button again to activate timer recording
standby.
[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when weekly or daily timer
recording is selected.
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press [OK].
3
Press [2, 1] to select “RENEW”
column.
4
Press [3, 4] to select “ON” and press
[OK].
≥
If a programme set for Auto Renewal Recording is protected or
while playback is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥
Playlist (Video) made from programmes that were set for Auto
Renewal Recording are deleted along with auto renewal.
≥
When there is not enough space on the HDD, the programme may
not be recorded completely.
In timer recording of digital broadcast with multi-audio or multi-
subtitle, audio and subtitle language to be recorded will follow the
setting of “DVB Preferred Language” in the Setup menu (> 65).
≥
When a timer recording is set, DVDs that were recorded using a
different TV system (PAL/NTSC) cannot be played unless the TV
system is changed in the Setup menu (> 69) or the timer
recording has completed or has been cancelled.
≥
Timer recordings are activated regardless of whether the unit is
turned on/off.
≥
Timer recordings begin when the set time is reached even when
playing.
≥
Timer recordings do not begin while editing or copying in normal
speed mode (> 51).
≥
If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥
When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
To cancel recording when recording
has already begun
To release the unit from recording
standby
Auto Renewal Recording
Stop Recording
Stop Recording
Cancel
Timer recording in progress.
Stop this timer recording ?
It will be cancelled if you stop.
OK
RETURN
SELECT
Timer
Recording
30:24 SP
HDD
Remain
Mode
Stop Drive
Start
Channel Date
22:30
22:00
SUN
1 ARD
Programme Name
SP
RENEW
ON
STTL
OFF
TUE 11.10.11. 12:53:00
HDD
All Channels : ARD
Note
Language for digital broadcast with
multi-audio or multi-subtitle
Notes on timer recording
Not recorded
Programme
Recorded
Recorded
Programme
DMREX645EP-VQT3F54_eng.book 27 ページ 2011年8月11日 木曜日 午後3時18分
27
VQT3F54
Ad
van
ced
op
erati
on
s
1
While the unit is on
Press [∫].
2
Press [2, 1] to select “Stop
Recording” and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press the “Red” button.
≥
The timer icon “F” (> 30) disappears from the timer
recording list.
≥
You cannot cancel timer recording standby mode as long as
even one timer icon “F” (> 30) remains in the timer
recording list.
≥
Press the “Red” button again to activate timer recording
standby.
[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when weekly or daily timer
recording is selected.
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press [OK].
3
Press [2, 1] to select “RENEW”
column.
4
Press [3, 4] to select “ON” and press
[OK].
≥
If a programme set for Auto Renewal Recording is protected or
while playback is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥
Playlist (Video) made from programmes that were set for Auto
Renewal Recording are deleted along with auto renewal.
≥
When there is not enough space on the HDD, the programme may
not be recorded completely.
In timer recording of digital broadcast with multi-audio or multi-
subtitle, audio and subtitle language to be recorded will follow the
setting of “DVB Preferred Language” in the Setup menu (> 65).
≥
When a timer recording is set, DVDs that were recorded using a
different TV system (PAL/NTSC) cannot be played unless the TV
system is changed in the Setup menu (> 69) or the timer
recording has completed or has been cancelled.
≥
Timer recordings are activated regardless of whether the unit is
turned on/off.
≥
Timer recordings begin when the set time is reached even when
playing.
≥
Timer recordings do not begin while editing or copying in normal
speed mode (> 51).
≥
If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥
When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
To cancel recording when recording
has already begun
To release the unit from recording
standby
Auto Renewal Recording
Stop Recording
Stop Recording
Cancel
Timer recording in progress.
Stop this timer recording ?
It will be cancelled if you stop.
OK
RETURN
SELECT
Timer
Recording
30:24 SP
HDD
Remain
Mode
Stop Drive
Start
Channel Date
22:30
22:00
SUN
1 ARD
Programme Name
SP
RENEW
ON
STTL
OFF
TUE 11.10.11. 12:53:00
HDD
All Channels : ARD
Note
Language for digital broadcast with
multi-audio or multi-subtitle
Notes on timer recording
Not recorded
Programme
Recorded
Recorded
Programme
DMREX645EP-VQT3F54_eng.book 27 ページ 2011年8月11日 木曜日 午後3時18分
Program
Snimljeno
Snimljeno
Nije snimljeno
Program
Napomena