Panasonic DMR-EX85 Operating Guide

After completing the above connections, proceed to the Auto-Setup to tune in 
TV channels.

The terminals can be used for INTERLACE or PROGRESSIVE output and deliver a 
clearer picture than the S VIDEO OUT terminal. 
The Q Link functions are not available with this kind of connection.

  Connect the aerial to RF IN (Aerial input) of the DVD Recorder.

  Connect RF OUT (Aerial output) of the DVD Recorder with the 

aerial input of the TV.

Connect the COMPONENT VIDEO OUT terminals of the unit with the 

COMPONENT VIDEO IN of the TV unit. Use a video cable. 
Always connect terminals with the same colour. 
Connect the audio cables to the corresponding audio input terminals on the TV.

Connect the DVD Recorder and the television to the household mains socket.

AC mains lead (included)
Connect only after all other 
connections are complete.

To household mains socket
(AC 220 V to 240 V, 50 Hz)

RF IN

RF coaxial cable (included, black)

Audio cable 
L

- White

R

- Red

COMPONENT VIDEO IN

 Y

- Green

PB - Blue

PR - Red

Use one of the included RF coaxial cable (black or grey) to connect this unit’s RF IN terminal to your aerial socket or aerial cable. 

RF coaxial cable (included, grey)

RF coaxial cable (included, black)

or

AUDIO IN

The RF cable cannot be used for 
showing pictures from the DVD 
Recorder. The unit must be connected 
by another means e.g. Scart cable to 
show pictures from the DVD Recorder 
on the television set.