Panasonic DMR-EX85 Operating Guide
61
Setup
TV Aspect
Progressive
TV System
16:9
On
PAL
AV1 Output
Video
AV2 Settings
HDMI Settings
Tuning
Disc
Picture
Disc
Picture
Sound
Display
Others
Connection
Connecting a TV with COMPONENT VIDEO input terminals
If your TV with LCD or plasma screen supports the progressive process, connect it
to the COMPONENT VIDEO OUT terminals.
If you want to enjoy full progressive video, set Progressive to [On].
If your TV with LCD or plasma screen supports the progressive process, connect it
to the COMPONENT VIDEO OUT terminals.
If you want to enjoy full progressive video, set Progressive to [On].
COMPONENT VIDEO OUT terminal
The terminals can be used for INTERLACE or PROGRESSIVE output and deliver a
clearer picture than the S VIDEO OUT terminal. Connections via these terminals output
the colour difference signals (P
The terminals can be used for INTERLACE or PROGRESSIVE output and deliver a
clearer picture than the S VIDEO OUT terminal. Connections via these terminals output
the colour difference signals (P
B
/P
R
) and the brightness signal (Y) separately.
Colours can be reproduced true to the original colour. The properties of the
COMPONENT VIDEO input terminal are dependent on the TV or screen.
COMPONENT VIDEO input terminal are dependent on the TV or screen.
Progressive television picture
The progressive picture aspect ratio (height to width) is set to 16:9. DVD-Video with a
picture aspect ratio of 16:9 is properly displayed. However, video material with an
image page ratio of 4:3 is shown stretched from right to left. If it is possible to adjust
the picture aspect ratio on your television, select the setting [Progressive - On].
The progressive picture aspect ratio (height to width) is set to 16:9. DVD-Video with a
picture aspect ratio of 16:9 is properly displayed. However, video material with an
image page ratio of 4:3 is shown stretched from right to left. If it is possible to adjust
the picture aspect ratio on your television, select the setting [Progressive - On].
If the AV1 Output setting in the Setup menu is set to [RGB 1/2 ( without component )],
there is no output to the COMPONENT VIDEO OUT terminals.
Set this option to [Video ( with component )].
If the unit is connected to the TV via the S VIDEO OUT or the AV1 terminal, output
is Interlace regardless of the settings
there is no output to the COMPONENT VIDEO OUT terminals.
Set this option to [Video ( with component )].
If the unit is connected to the TV via the S VIDEO OUT or the AV1 terminal, output
is Interlace regardless of the settings
.
!
Press FUNCTIONS.
!
Select [To Others] with
and confirm with ENTER.
!
Select [Setup] with
and confirm with ENTER.
!
Select [Connection] with
, [Progressive] with ,
and confirm with ENTER.
!
Select the option [On] with
and confirm with ENTER.
Tuning
Disc
Picture
Disc
Picture
Sound
Display
Connection
Setup
TV Aspect
Progressive
TV System
16:9
On
PAL
AV1 Output
RGB 1
AV2 Settings
HDMI Settings
Others
SELECT
ENTER
RETURN
TAB
SELECT
RETURN
ENTER
Video ( with component )
AV1 Output
S Video ( with component )
RGB 1
( without component )
RGB 2 ( without component )
RGB output is available all the
time while this unit is on.
time while this unit is on.
99
50
Additional connections
Connection to COMPONENT VIDEO terminal
Progressive-compatible televisions (PAL)
51
50
To use progressive output select in the setup menu [Progressive - ON] for
component output, or [576p or 720p] for HDMI output. This may cause
flickering of TV Guide, information banner or subtitles display on some
televisions (CRT, LCD or plasma).
In this case change progressive mode to OFF for component output, or
select 576i or 1080i video format for HDMI output.
component output, or [576p or 720p] for HDMI output. This may cause
flickering of TV Guide, information banner or subtitles display on some
televisions (CRT, LCD or plasma).
In this case change progressive mode to OFF for component output, or
select 576i or 1080i video format for HDMI output.