Panasonic DMR-ES30V Operating Guide

VQT0Q46

During a timer recording performed in SP mode, this function 
automatically changes the recording mode if the unit determines that 
the remaining tape is insufficient to record the entire programme. If 
the remaining tape time is still not sufficient even in LP mode, the 
programme cannot be recorded to the end.

≥This function cannot change the recording mode to the EP mode 

for PAL system.

≥This function may not work correctly when you record programmes 

in NTSC system.

≥The tape length must be set correctly. (

≥Some tapes may not work correctly.
≥If the recording mode changes during a timer recording, some 

picture distortion occurs at the point.

≥Even when the unit is turned off, you can display the timer 

recording list by pressing [PROG/CHECK].

Preparation
≥Press [VHS].

[1]

[2]

3, 4] to select a programme.

[3]

¢, CANCEL] to delete, or press [ENTER] 

You cannot delete or change programmes that are currently 
recording.

[4]

3, 4, 2, 1] to change and press [ENTER].

≥To continue changing programmes steps 2–4.

[5]

≥“

” lights on the VHS unit’s display.

The timer recording standby mode is activated on VHS. 
However, the unit may not be turned off automatically.
≥You can play or record any media on DVD even if the timer 

recording standby mode is activated on VHS.

≥Timer recording can be started whether the unit is turned on or off.

[6]

≥If the timer recording is started with keeping the unit turned on, 

the unit is not turned off automatically even after the timer 
recording is completed. You can turn the unit off during timer 
recording.

For your reference
≥Programmes that failed to record are deleted from the timer 

recording list at 4 a.m. 2 days later. 

M7620(GC).book  53 ページ  ２００５年５月２５日　水曜日　午後１２時１６分