Panasonic DMR-ES30V Operating Guide

VQT0Q46

≥DVD-Video:

You can play DVD-Video multi channel surround by digitally connecting an amplifier 
equipped with a Dolby Digital or DTS decoder.

≥DVD-Audio:

This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.

–

≥You cannot directly connect to the unit. Connect through the amplifier etc.

≥Connecting with the component video terminal provides a more vivid picture compared to 

connecting with the S Video terminal.
If you have an LCD/plasma television or LCD projector compatible with progressive scan, 
connect through the component video terminals for high-quality progressive video.
If you have a CRT television or a multi system television using PAL mode that is 
compatible with progressive scan, we cannot recommend progressive output as some 
flickering can occur.

≥All Panasonic television that have 576 (625)/50i · 50p, 480 (525)/60i · 60p input terminals 

are compatible. Consult the manufacturer if you have another brand of television.

–

≥You cannot play DVD-Video if its region number does not include “2” or “ALL”.

≥The DVD-Video region number indicates the disc conforms to a standard. You cannot 

play discs that do not have a region number.

–

≥The unit records and plays DVD-R, DVD-RW (DVD-Video format) and +R, and plays 

DVD-RW (DVD Video Recording format) and +RW.

≥The unit also records and plays high speed recording compatible DVD-R, DVD-RW, +R 

discs.

6, 7

≥This unit plays CD-R/CD-RW discs which have been recorded in one of the following 

standards: CD-DA, Video CD, MP3 and still pictures (JPEG/TIFF). Close the session or 
finalize the disc after recording. This unit can recognize up to 99 folders (groups) and 999 
files (tracks) on a disc with MP3 or still pictures (JPEG/TIFF).

≥You cannot write to a CD-R or CD-RW with the unit.

7, 21, 

≥Most commercially sold video cassettes and DVD are copy protected; therefore, 

recording is usually not possible.

–

≥You can play on compatible equipment such as DVD players after finalizing the disc on 

this unit. However, depending on the condition of the recording, the quality of the disc and 
capabilities of the DVD player, play may not be possible.

≥You cannot record digital signals. The digital audio terminals on the unit are for output 

only.

–

≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio 

Output” settings to the following from the SETUP menu.
- “PCM Down Conversion”: “On”
- “Dolby Digital”/“DTS”/“MPEG”: “PCM”
However, only
- As long as digital recording from the disc is permitted.
- As long as the recording equipment is compatible with 48 kHz of sampling frequency.

≥You cannot record MP3 signals.

–

≥With DVD-RAM/cassette tape, you can. Just press [AUDIO].
≥With DVD-R, DVD-RW (DVD-Video format), +R you cannot. Change before recording 

with “Bilingual Audio Selection” in the SETUP menu.

–

M7620(GC).book  67 ページ  ２００５年５月２５日　水曜日　午後１２時１６分