Panasonic dmre60 Instruction Manual
53
Upgrading your system (continued)
Connecting a Decoder
Decoder here refers to the device used to decode scrambled
broadcasts (Pay TV).
broadcasts (Pay TV).
(1) Decoder (not supplied)
(2) 21-pin Scart socket
(3) 21-pin Scart cable (not supplied)
(2) 21-pin Scart socket
(3) 21-pin Scart cable (not supplied)
Connect a 21-pin Scart cable (not supplied) to the AV2 21-
pin Scart socket on the unit and to the 21-pin Scart socket
on the decoder.
pin Scart socket on the unit and to the 21-pin Scart socket
on the decoder.
Connect the decoder’s mains lead to an AC mains socket.
Set “AV2 Connection” to “DECODER”. (page 58)
≥If you connect an other equipment with RGB output capability to
the AV2 socket on this unit, the output signal of the equipment
must be set to RGB when you have set “AV2 Input” to “RGB (PAL
only)”.
must be set to RGB when you have set “AV2 Input” to “RGB (PAL
only)”.
AV Link Function
If the unit is connected to the TV via a 21-pin Scart cable, you can
use the [AV LINK]
use the [AV LINK]
(35) to switch the TV from normal TV reception
over to the video playback channel (AV input) (and vice versa). In
the unit mode (when the “DVD” indication in the unit display is lit),
the TV is switched to the video playback channel (AV input). In the
TV mode (when the “DVD” indication is not lit), the TV is switched
to TV reception.
AV link stops working if the “DVD” indicator appears on the display
(when you start play or show on-screen displays).
the unit mode (when the “DVD” indication in the unit display is lit),
the TV is switched to the video playback channel (AV input). In the
TV mode (when the “DVD” indication is not lit), the TV is switched
to TV reception.
AV link stops working if the “DVD” indicator appears on the display
(when you start play or show on-screen displays).
Note
[RGB] means separate Red/Green/Blue colour signals. If you
connect a TV equipped with RGB input capability to the AV1
socket on this unit, and a decoder equipped with RGB output
capability to the AV2 socket, the TV can receive RGB signal input
from the decoder via the unit.
RGB output signals only appear when the “DVD” indicator is on. To
show RGB output signals while stopped or recording, press
[AV LINK]
[RGB] means separate Red/Green/Blue colour signals. If you
connect a TV equipped with RGB input capability to the AV1
socket on this unit, and a decoder equipped with RGB output
capability to the AV2 socket, the TV can receive RGB signal input
from the decoder via the unit.
RGB output signals only appear when the “DVD” indicator is on. To
show RGB output signals while stopped or recording, press
[AV LINK]
(35) so the “DVD” indicator lights.
Connecting a satellite receiver or digital
receiver
receiver
(1) Satellite receiver (not supplied)
(2) 21-pin Scart socket
(3) 21-pin Scart cable (not supplied)
(2) 21-pin Scart socket
(3) 21-pin Scart cable (not supplied)
Connect a 21-pin Scart cable (not supplied) to the AV2 21-
pin Scart socket on the unit and to the 21-pin Scart socket
on the satellite receiver.
pin Scart socket on the unit and to the 21-pin Scart socket
on the satellite receiver.
Connect the satellite receiver’s mains lead to an AC mains
socket.
socket.
Set “AV2 Connection” to “EXT”, “Ext Link 1” or “Ext Link 2”.
(page 58)
(page 58)
≥If you connect an other equipment with RGB output capability to
the AV2 socket on this unit, the output signal of the equipment
must be set to RGB when you have set “AV2 Input” to “RGB (PAL
only)”.
must be set to RGB when you have set “AV2 Input” to “RGB (PAL
only)”.
RF IN
RF OUT
OPTICAL
AV1 (TV)
AV2 (DECODER/EXT)
DIGITAL AUDIO OUT
(PCM/BIT STREAM)
(PCM/BIT STREAM)
R - AUDIO - L
VIDEO
S-VIDEO
R - AUDIO - L
VIDEO
S-VIDEO
A
V4 IN
OUT
(1)
(2)
(3)
RF IN
RF OUT
OPTICAL
AV1 (TV)
AV2 (DECODER/EXT)
DIGITAL AUDIO OUT
(PCM/BIT STREAM)
(PCM/BIT STREAM)
R - AUDIO - L
VIDEO
S-VIDEO
R - AUDIO - L
VIDEO
S-VIDEO
A
V4 IN
OUT
(1)
(2)
(3)
DVD(PAL).book 53 ページ ２００３年５月１日 木曜日 午後１０時４３分