Panasonic DMRE50EG Instruction Manual

t

[RAM] 

During play or Time Slip, you can play faster than the normal play 
to save time by Quick View function.

1] (21) for about 1 second.

≥Press [1] (21) to return to normal play.
≥You cannot use this feature if the “Play k1.3 & Audio during 

Search” of “Sound” is “Off” (page 55).

≥This feature can be activated only on DVD-RAM recorded with 

Dolby Digital.

≥Simultaneous recording and play with Quick View (Play k1.3) is 

possible only during SP, LP and EP recording mode.

≥Quick View (Play k1.3) cannot operate when “editing menu” is 

displayed. (pages 39, 41, 43, 44)

≥During Quick View (Play k1.3), the Digital Audio Output will 

change to PCM Output.

≥During Quick View (Play k1.3), it may cause the picture to freeze 

for a moment when scenes change.

[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]

∫] (7).

≥The unit remembers the position.

1] (21).

≥Play starts from where you stopped it.

ªTo cancel the resume function

Press [

∫] (7) while the unit remembers the position.

(The position is also cleared when you turn the unit off.)

ªTo start play from a memorized position after turning 

Press [POSITION MEMORY] 

(36) during play.

(The message “Position Memorized” appears on the television.)
Now when you press [

1] (21) after switching the unit to standby 

and back on, play starts from the memorized position.

For your reference
[DVD-R] [DVD-V] [CD] [VCD] [MP3]
≥The position memorized when you press [∫] (7) or 

[POSITION MEMORY] 

(36) is cleared when you open the disc 

tray.

[RAM] 
≥The position memory is written to the disc and remains intact until 

you mark a different position.
You cannot mark positions if the disc is write-protected with DISC 
INFORMATION (page 33) or with the write protect tab (page 69). 
Release the protection before marking position.

≥If you press [∫] (7) before switching the unit to standby after 

pressing [POSITION MEMORY] 

(36) to memorize a position, 

play will resume from the position you pressed [

∫] (7) when you 

press [

1] (21).

[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]

6, SLOW/SEARCH] or [5, SLOW/SEARCH] 

(20).

[

6]: backward

[

5]: forward

≥If using the [:/6] or [5/9] (45) button on the unit, 

keep pressing the button for 1 or more seconds.

≥There are 5 search speeds. Each press increases the search 

speed.

≥The search speed is maintained when you release the button.
≥Press [1] (21) to return to normal play.
≥You will hear sound at speed one (only forward) when playing 

DVD-RAM, DVD-R, DVD-Video and Video CDs. You can turn 
this sound off if you want to (page 55, “Sound”— “Play 

k1.3 & 

Audio during Search”).

≥Sound is not heard during chasing play and simultaneous 

recording and play.

[RAM] [DVD-R] [DVD-V] [VCD]

6, SLOW/SEARCH] or [5, SLOW/SEARCH] 

(20).

[

6]: backward (does not work with Video CDs)

[

5]: forward

≥If using the [:/6] or [5/9] (45) button on the unit, 

keep pressing the button for 1 or more seconds.

≥There are 5 slow-motion speeds. Each press increases the slow-

motion speed.

≥The slow-motion speed is maintained when you release the 

button.

≥Press [1] (21) to return to normal play.

[RAM] [DVD-R] [DVD-V] [VCD]

2;, FRAME] or [;1, FRAME] (32) or [2, 1] 

(10).

[

2;] or [2]: backward (does not work with Video CDs)

[

;1] or [1]: forward

≥Each press shows the next or previous frame.
≥Press [1] (21) to return to normal play.

DVD(PAL).book  16 ページ  ２００３年２月５日 水曜日 午後１時４８分