Panasonic KXFLB853FX Operating Guide
4. Fax
33
or letter-sized paper, then setting the copied
document.
document.
L
Do not set documents that do not satisfy the
requirements of size and weight when using
the auto document feeder. Make a copy of
the document using the scanner glass and
set the copy.
requirements of size and weight when using
the auto document feeder. Make a copy of
the document using the scanner glass and
set the copy.
L
Remove clips, staples or other fasteners
when using the auto document feeder.
when using the auto document feeder.
L
Do not set the following types of documents
when using the auto document feeder: (Make
a copy of the document using the scanner
glass and set the copy instead.)
–
when using the auto document feeder: (Make
a copy of the document using the scanner
glass and set the copy instead.)
–
Chemically treated paper such as carbon
or carbonless duplicating paper
or carbonless duplicating paper
–
Electrostatically charged paper
–
Badly curled, creased or torn paper
–
Paper with a coated surface
–
Paper with printing on the opposite side
that can be seen through the other side,
such as newsprint
that can be seen through the other side,
such as newsprint
4.4 Sending a fax using
one-touch dial feature and
navigator directory
one-touch dial feature and
navigator directory
Before using this feature, store the desired
names and telephone numbers into one-touch
dial feature and navigator directory (page 28).
names and telephone numbers into one-touch
dial feature and navigator directory (page 28).
L
Keep the front cover page open for button
locations.
locations.
L
Make sure that the {FAX} light is ON.
1
Adjust the width of the document guides to fit
the actual size of the document.
the actual size of the document.
2
Insert the document (up to 50 pages) FACE
UP into the feeder until a single beep is
heard.
UP into the feeder until a single beep is
heard.
L
Confirm that there are no documents
on the scanner glass.
on the scanner glass.
L
If the document guides are not adjusted
to fit the document, re-adjust them.
to fit the document, re-adjust them.
3
4
Enter the fax number.
Using stations 1–9:
Press the desired station key.
Using stations 10–18:
Press {LOWER}, then press the desired
station key.
station key.
Using navigator directory:
Press {DIRECTORY}, then press {V} or {^}
repeatedly to display the desired item.
repeatedly to display the desired item.
5
Press {START}.
Note:
L
Do not open the document cover when
sending a fax with the auto document feeder.
sending a fax with the auto document feeder.
To send a fax using the scanner glass
L
Confirm that there are no documents in
the auto document feeder.
the auto document feeder.
1. Open the document cover.
2. Place the document FACE DOWN, then
close the document cover.
3. Enter the fax number using one-touch dial or
navigator directory.
L
To send a single page, skip to step 7.
L
To send multiple pages, go to the next
step.
step.
FLB853FX-PFQX2355ZA-en.book Page 33 Friday, January 13, 2006 2:25 PM