Panasonic DMWFL200LPP Operating Guide
SQT1378
12
Slave Mode
The flash can be fired remotely in sync with any flash fired
by other units.
by other units.
1 Set the flash mode to
[SLAVE].
“Flash Mode” (P9)
2 Position the flash.
Flash positioning method is same
as the wireless mode.
“Placing Wireless Flash Units”
(P11)
Refer to the camera operating
instructions for details about the
flash positioning range.
• Set the flash mode of the camera to the manual which
as the wireless mode.
“Placing Wireless Flash Units”
(P11)
Refer to the camera operating
instructions for details about the
flash positioning range.
• Set the flash mode of the camera to the manual which
does not fire the pre-flash. If the camera fires the pre-
flash, the external flash synchronizes with the pre-flash
of the camera, and cannot fire the flash light properly.
flash, the external flash synchronizes with the pre-flash
of the camera, and cannot fire the flash light properly.
• The flash may fire in response to flash units used by
other photographers.
Cautions for Use
∫
About the unit
Do not carry the unit when it is still attached to the
camera body.
camera body.
We recommend that you place the unit in the flash case
when carrying it.
≥ Place the unit in the flash case with the flash head side
when carrying it.
≥ Place the unit in the flash case with the flash head side
up.
∫
About the batteries
Be sure to remove the batteries when you will not be
using the unit for a long period of time.
using the unit for a long period of time.
SQT1378_ENG.fm 12 ページ ２０１６年４月２２日 金曜日 午後６時０分