Panasonic DMC-TS1 Operating Guide
- 187 -
Others
> Press [MENU/SET], select the [SETUP] menu icon [ ] and then select the [~] icon to set
the desired language.
•
•
Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]?
•
The AF assist lamp does not turn on in bright places.
•
The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
•
The temperature of the camera may fall and the camera parts may not work well if you leave it
as it is after taking it out of water, snow etc. following use in a cold environment such as low
temperature water or on a snow-covered mountain etc. This is not a malfunction. The camera
will recover after returning to normal temperature.
•
When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
•
If you do not use the camera for a long time, the clock may be reset.
> When the message [PLEASE SET THE CLOCK] appears, set the clock again. When you
take a picture before setting the clock, [0:00
Others
An unreadable language was selected by mistake.
White lamp may come on when the shutter button is pressed halfway.
The AF assist lamp does not turn on.
The camera becomes warm.
A part of the camera such as the zoom lever and card/battery door, and terminal
cover does not move.
cover does not move.
The lens clicks.
The clock is reset.