Panasonic KX-PS8000 Manual

Adjusts a print density from level 1 to 5. Level 1
produces the lightest printout (duplicate), and level 5
produces the darkest.

Selects a media tray.

Selects the same media size that you have inserted
in the multi-purpose tray. Only Letter, A4 and Legal
media sizes can be used with the multi-purpose tray.

Selects the same media type that you have inserted
in the multi-purpose tray.

Allows you to select a resolution at which you wish
to make a duplicate of your original document placed
on the flatbed (scanner glass).

Allows you to select a resolution at which you wish
to make a duplicate(s) of your original document(s)
inserted in the ADF tray.

Allows you to select Face Up or Face Down printing.

Makes a duplicate(s) of your original document(s)
face up in the printer’s output tray.

Makes a duplicate(s) of your original document(s)
face down in the printer’s output tray.

The Output Order (ADF) is effective only when using
ADF.

B

When using flatbed (scanner glass), your
duplicate will always be printed face up.

B

When using the multi-purpose tray, your duplicate
will always be printed face up.

After clearing a media jam in the printer:
If Jam Recovery is set to On, printing resumes from
the same page at which the jam occurred by
pressing the START COLOR/ENTER button. If it is
set to Off, printing does not resume.
When Jam Recovery is set to On, the printing speed
is slower.
For a jam in the ADF, the setting has no effect.

To conserve energy and operating cost, this scanner
is provided with a programmable power save
feature. Scanner is factory set with the power save
feature turned on. If Energy Star is set to On, the
scanner enters the Energy Star mode when it is idle
for approximately 5 minutes. To reactivate the
scanner, scan a document. The Energy Star setting
will remain effective even if the scanner is turned off.

B

When the printer is in the Energy Star mode
[“PRT is ready (sleep)” is displayed on the
scanner LCD.], press any button on the
scanner panel to release the Energy Star
mode. 
The START COLOR/ENTER button and
START B/W button have no effect until the
printer is ready. However, the menu settings
can be changed.

If the START COLOR/ENTER button is pressed
when Set is selected for Menu Default, all current
menu settings will remain effective even if the
scanner is turned off. If Reset is selected, all menu
settings except the Energy Star setting will return to
the factory default settings.

Face Up

Face Down *

1

On

Off *

1

Output Order (ADF)

JAM Recovery

Energy Star

Menu Default

On *

1

Off

Set *

1

Reset

*

1

Factory default setting