Panasonic KX-PS8000 Manual
30*
1
(30 to 240 s)
System Setting
Main Menu
Item Menu
Test Page
Selection 2 Menu
Selection 1 Menu
Configuration Page
Calibration Offset
CYAN
MAGENTA
YELLOW
BLACK
Calibration Test Print
Reset Calibration
0*
1
(-5 to 5)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
YES
NO
Energy Star
Auto Continue
Color Calibration
ON*
1
Data Timeout
OFF
ON
OFF*
1
ON
OFF*
1
IP Address
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Network *
2
Subnet Mask
Default Gateway
51
Printer Menu Mode
The printer Menu mode includes a Main menu, Item
menu, Selection 1 menu and Selection 2 menu
which can be changed from the printer panel.
menu, Selection 1 menu and Selection 2 menu
which can be changed from the printer panel.
When Ready is displayed in the upper line of the
LCD, pressing the MENU/EXIT button will allow you
to enter the Menu mode.
Once in the Menu mode:
LCD, pressing the MENU/EXIT button will allow you
to enter the Menu mode.
Once in the Menu mode:
B
Press the
F
/CONTINUE button to:
Display the next menu.
Display the next item.
Increase the numerical value of the selection by
1 or display the next selection.
1 or display the next selection.
B
Press the
I
/CANCEL button to:
Display the previous menu.
Display the previous item.
Decrease the numerical value of the selection
by 1 or display the next selection.
by 1 or display the next selection.
B
Press the ENTER button to:
Enter a sub - menu.
Activate a selection.
Print a Configuration/Maintenance/
Color Calibration Page.
Color Calibration Page.
Before you attempt to change any settings, check
the factory default settings in the following table. For
details on changing the settings, refer to Outline for
Operation (
the factory default settings in the following table. For
details on changing the settings, refer to Outline for
Operation (
☞
P. 53).
Once you have changed the printer panel settings,
they are automatically saved as user default settings
even if the power is turned off.
they are automatically saved as user default settings
even if the power is turned off.
*
1
Factory default setting
*
2
This menu appears when the optional network card is installed.
Basic
Operations
Printer
Menu
Mode
Maintenance Page
CYAN
MAGENTA
YELLOW
BLACK
(continued)