Panasonic DMC-LZ7 Operating Guide
Advanced (Recording pictures)
62
VQT1C52
Press [
] to display the [REC] mode
menu and select the item to set. (P56)
∫ About the jitter/movement detection
demonstration screen
Press
1 on the [STABILIZER] screen to
display the jitter/movement detection
demonstration screen. (You cannot take
pictures while the demonstration screen is
displayed.) Press
demonstration screen. (You cannot take
pictures while the demonstration screen is
displayed.) Press
1 to exit the
demonstration screen.
A: Jitter detection demonstration
B: Movement detection demonstration
• The jitter/movement detection
B: Movement detection demonstration
• The jitter/movement detection
demonstration screen is an
approximation.
approximation.
• The camera also detects the movement of
the subject when automatically setting the
ISO sensitivity in intelligent ISO sensitivity
mode [
ISO sensitivity in intelligent ISO sensitivity
mode [
] (P42) and [SPORTS] (P45),
[BABY1]/[BABY2] (P47) and [PET] (P48)
in scene mode only.
in scene mode only.
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
places.
Be careful of camera jitter when you press
the shutter button.
the shutter button.
• In simple mode [
], the setting is fixed
to [MODE1] and in [STARRY SKY] (P49)
in scene mode it is fixed to [OFF].
in scene mode it is fixed to [OFF].
• In motion picture mode [
], [MODE2]
cannot be set.
Press [
] to display the [REC] mode
menu and select the item to set. (P56)
When burst is set to [ON], it is activated
while the shutter button is pressed.
When burst is set to [ON], it is activated
while the shutter button is pressed.
• You can only take one picture when the
flash is activated.
• The burst speed becomes slower
halfway. The exact timing of this depends
on the type of card, the picture size and
the quality.
on the type of card, the picture size and
the quality.
• You can take pictures until the capacity of
the built-in memory or the card is full.
• The burst speed becomes slower if the
ISO sensitivity (P42, 59) is set to [ISO400]
or higher.
or higher.
• The burst speed may become slower in
dark places because the shutter speed
becomes slower.
becomes slower.
[STABILIZER]
Detecting jitter and compensating
for it
for it
[MODE1]
(
(
)
The stabilizer operates
continuously and can assist
during photo composition.
continuously and can assist
during photo composition.
[MODE2]
(
(
)
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
(
(
)
When the stabilizer is not
desired.
desired.
MENU
SET
EXIT
JITTER, SUBJ. MOVE DEMO.
CANNOT BE DISPLAYED
IN REC MODE
IN REC MODE
[BURST]
Taking pictures using burst
Taking pictures using burst
MENU
SET
VQT1C52ENG.book 62 ページ 2006年12月29日 金曜日 午後2時14分