Panasonic DMC-LZ7 Operating Guide

Page of 104
Advanced (Playback)
79
VQT1C52
(Even if the pictures were recorded with a 
Panasonic digital camera, you may not be 
able to copy them if they were edited with 
a PC.)
• DPOF settings on the original picture data 
will not be copied. Set the DPOF settings 
again after copying is finished. (P74)
Press [
] to display the [PLAY] mode 
menu and select the item to set. (P68)
Usually, it is not necessary to format the 
built-in memory and the card. Format them 
when the message [BUILT-IN MEMORY 
ERROR] or [MEMORY CARD ERROR] 
appears.
Press 
3 to select [YES] and then 
press [MENU/SET].
(The illustration shows the screen when 
the built-in memory is formatted.)
• When a card is not inserted, you can 
format the built-in memory. When a 
card is inserted, you can format the 
card.
• If you press [MENU/SET] while 
formatting the built-in memory, the 
formatting will stop halfway. (However, 
all the pictures will be deleted.)
• Formatting irretrievably deletes all the 
data including any protected pictures. 
Check the data carefully before 
formatting.
• If the card has been formatted on a PC or 
other equipment, format it on the camera 
again.
• Use batteries with sufficient power (P22) 
or the AC adaptor (DMW-AC6E; optional) 
when formatting.
• Do not turn the camera off during 
formatting.
• It may take longer to format the built-in 
memory than the card. (Max. about 
15 sec.)
• You cannot format an SD Memory Card or 
an SDHC Memory Card when the card’s 
Write- Protect switch 
A is set to [LOCK].
• If the built-in memory or the card cannot 
be formatted, consult your nearest service 
centre.
[FORMAT] 
Initializing the built-in memory or a 
card
MENU
SET
FORMAT
DELETE ALL DATA
ON THE BUILD-IN MEMORY?
NO
YES
SELECT
SET
MENU
MENU
SET
2
VQT1C52ENG.book  79 ページ  2006年12月29日 金曜日 午後2時14分