Panasonic DMC-LS85 Operating Guide

Page of 104
Advanced-Shooting
43
VQT1X17
q [PORTRAIT]
The person stands out with a healthier complexion.
Technique for Portrait mode
To make this mode more effective:
1  Rotate the zoom lever to Tele as far as possible.
2  Move close to the subject.
 Note
•  Suitable for outdoors in the daytime.
•  The ISO sensitivity is fi xed to [ISO80].
•  The initial setting for [AF MODE] is [3].
w [SOFT SKIN]
The camera detects the face or skin area to achieve a smoother appearance than portrait mode. 
Use when taking portraits from the chest up.
Technique for Soft skin mode
To make this mode more effective:
1  Rotate the zoom lever to Tele as far as possible.
2  Move close to the subject.
 Note
•  Suitable for daylight shooting.
• Other fl esh-coloured elements are also softened.
•  The effect may not be as obvious if there is not enough light.
•  The ISO sensitivity is fi xed to [ISO80].
•  The initial setting for [AF MODE] is [3].
e [SELF PORTRAIT]
For taking pictures of yourself easily.
Technique for Self portrait mode
•  Press the shutter button halfway to focus. The self-timer indicator lights 
up when you are brought into focus. Making sure you hold the camera 
still, press the shutter button fully to take the picture.
•  The subject is not focused when the self-timer indicator is blinking. 
Make sure to press the shutter button halfway again to focus.
•  The recorded picture automatically appears on the LCD monitor for 
reviewing.
•  If the picture is blurry due to the slow shutter speed, we recommend using the 2 second self-
timer.
 Note
•  The focus range is about 30 cm (0.99 feet) to 1.2 m (3.94 feet) (Wide).
•  When you select [SELF PORTRAIT], the zoom magnifi cation is automatically moved to Wide.
•  The self-timer can only be set to [OFF] or [2SEC.]. If it is set to 2 seconds, this setting will 
remain until the camera is turned off, the Scene Mode is changed or the camera is switched to 
the Playback Mode.
•  Optical image stabilizer is fi xed to [MODE2]. (P59)
•  The initial setting for [AF MODE] is [3]
„
„
„
VQT1X17_DMC-LS85_EB_EN.indb   43
VQT1X17_DMC-LS85_EB_EN.indb   43
2008/12/24   18:25:40
2008/12/24   18:25:40