Panasonic DMC-LS85 Operating Guide

VQT1X17

&

When you press and hold the shutter button several pictures are taken in succession.

Applicable modes: 4 1 5

&

#

—

3

Approx. 2

h

—

Max. 4

Depends on the remaining 

capacity of the built-in 

memory/card.

8

—

Max. 7

 

The burst speed is constant regardless of the transfer speed of the card.

•  The burst speed values given above apply when the shutter speed is 1/60 or faster and when 

the fl ash is not activated. 

•  When the burst mode setting is set to [#]

– The burst speed becomes slower halfway. The exact timing of this depends on the type of 

card, the picture size and the quality.

– You can take pictures until the capacity of the built-in memory or the card is full.

•  The focus is fi xed when the fi rst picture is taken.

•  When the burst speed is set to [&], the exposure and white balance are fi xed at the settings 

used for the fi rst picture for the subsequent pictures as well. When the burst speed is set to [#], 

they are adjusted each time you take a picture.

•  When the self-timer is used, the number of recordable pictures in Burst Mode is fi xed to 3.

•  If you are following a moving subject while taking pictures in a place (landscape) indoors, 

outdoors etc. where there is a large difference between the light and shade, it may take time 

until the exposure is stable. If burst is used at this time, the exposure may not become optimal.

•  The burst speed (pictures/second) may become slower depending on the recording 

environment such as in dark places, if the ISO sensitivity is high etc.

•  Burst Mode is not cancelled when the camera is switched off.

•  If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture 

data.

•  In Burst Mode, the fl ash setting is fi xed to Forced fl ash OFF [o].

•  Burst Mode cannot be used [HI-SPEED BURST] and [STARRY SKY] in [SCENE MODE].

'

This can enlarge subjects even more than the optical zoom or extra optical zoom.

Applicable modes: 1 5 6

•  Refer to P30 for details.

•  If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] is 

set to [AUTO] or [MODE1].

•  You cannot use digital zoom when ISO sensitivity is at [i.AUTO].

VQT1X17_DMC-LS85_EB_EN.indb   58

VQT1X17_DMC-LS85_EB_EN.indb   58

2008/12/24   18:25:46

2008/12/24   18:25:46