Panasonic KXFC275E Operating Guide

Adjust the width of the document guides to fit the
actual size of the document.

Insert the document (up to 10 pages) FACE DOWN
until a single beep is heard and the unit grasps the
document.

If necessary, press MJN or MKN repeatedly to select
the desired resolution.

KX-FC275:
Lift the handset or press MSP-PHONEN.

KX-FC265:
MSP-PHONEN

Dial the fax number.

When a fax tone is heard:
Press MFAX STARTN.
When the other party answers your call:
Ask them to press their start button. When the fax
tone is heard, press MFAX STARTN.

To select the resolution
Select the desired resolution according to the character
size.
– “STANDARD”: For normal-sized characters.
– “FINE”: For small-sized characters.
– “SUPER FINE”: For very small-sized characters.
– “PHOTO”: For photographs, shaded drawings, etc.
R Using the “FINE”, “SUPER FINE” and “PHOTO”

settings will increase transmission time.

To redial the last number
MREDIALN A MFAX STARTN
R If the line is busy, the unit will automatically redial the

number up to 5 times.

R To cancel redialling, press MSTOPN.

To send more than 10 pages at a time
Insert the first 10 pages of the document. Add the other
pages (up to 10 at a time) on top of the previously
inserted pages while the last page is being fed into the
unit.

Pre-dialling a fax number
1. Enter the fax number.
2. Insert the document.
3. MFAX STARTN

Sending from memory (Quick scan feature)
To use this feature, activate feature #34 (page 44)
beforehand.
1. Insert the document.
2. Enter the fax number. A MFAX STARTN
R If the document exceeds the memory capacity,

transmission will be cancelled and this feature will be

turned OFF automatically. You must send the entire
document manually.

R This feature cannot be used if the handset is being

used (KX-FC275 only), or if MSP-PHONEN on the
base unit, M

N or M N on the cordless handset is

pressed.

To stop sending
Press MSTOPN.

To send a fax using the cordless handset
1. While talking to the other party, insert the document,

then press 

.

2. Select “Fax Start”, then press 

.

Printing a sending report
A sending report provides you with a printed record of
transmission results (errors, etc.). To print the sending
reports, make sure that feature #04 is activated
(page 42). The default setting is “ERROR”. For an
explanation of the messages, see page 55.

Printing a journal report
A journal report provides you with a printed record of the
30 most recent fax transmissions and receptions. To
print it manually, see page 68. To print it automatically
after every 30 new fax transmissions and receptions,
make sure feature #22 is activated (page 43). For an
explanation of the messages, see page 55.

Minimum document size
128 mm in width, 128 mm in length

Maximum document size
216 mm in width, 600 mm in length

Effective scanning area
R Shaded area will be scanned.

216 mm

208 mm

 4 mm

 4 mm

 2 mm

 2 mm

Document weight
R Single sheet:

45 g/m

2

 to 90 g/m

2

R Multiple sheets:

60 g/m

2

 to 80 g/m

2

30

4. . Fax