Panasonic KXFC278FX Operating Guide

Page of 72
2.1 Connections
Important:
The unit will not work during a power failure. We
recommend connecting a corded-type telephone
(without AC adaptor) to the same telephone line
or to the same telephone line jack, if you have
such a telephone jack in your house.
2.1.1 Base unit
A Telephone line cord
R Connect to a single telephone line jack.
B Power cord
R Connect to a power outlet (220 V – 240 V,
50/60 Hz).
B
A
Caution:
When you operate this product, the power outlet
should be near the product and easily accessible.
Be sure to use the telephone line cord included
in this unit.
Do not extend the telephone line cord.
Note:
R If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
R If you use the unit with a computer and your internet
provider instructs you to install a filter (C), please
connect it as follows.
C
2.1.2 Charger unit (KX-FC278 only)
A AC adaptor
R Connect to a power outlet (220 V – 240 V,
50/60 Hz).
B Hooks
R Fasten the AC adaptor cord to prevent it from
being disconnected.
C Screws (not included)
R The charger can be mounted on the wall, if
required.
25 mm
C
A
B
2 mm
*1
*1 Use screws longer than 20 mm.
Caution:
USE ONLY WITH the supplied Panasonic AC
adaptor.
The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet. Do
not connect the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor may cause
it to become disconnected.
17
2. . Preparation
2. Preparation