Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. CURE9NKE
  5. Operating Guide

Panasonic CURE9NKE Operating Guide

Download
Page of 72
10
REMOTE CONTROL
ANTI-BACTERIAL FILTER
CHEC
K ER
ROR R
ESET
RESE
T
SELEC
T
SET/CANC
EL
AIR C
ONDIT
IONER
QUIET
POWERFU
L
/
A
B
Press the remote control’s button
1
TO TURN ON OR OFF THE UNIT
•  Please be aware of the OFF indication on the remote 
control display to prevent the unit from starting/stopping 
improperly.
2
 TO SET TEMPERATURE
•  Selection range: 16°C ~ 30°C.
•  Operating the unit within the recommended temperature 
could induce energy saving. 
HEAT mode : 20°C ~ 24°C. 
COOL mode : 26°C ~ 28°C. 
DRY mode : 1°C ~ 2°C lower than room temperature.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
•  During operation mode selection the power indicator 
blinks.
•  Unit selects the operation mode according to the indoor 
intake temperature and remote control temperature.
HEAT mode - To enjoy warm air
•  In heat mode, it may take a while for the unit to warm up. 
The POWER indicator blinks during preheating.
COOL mode - To enjoy cool air
•  Use curtains to screen off sunlight and outdoor heat to 
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
•  Unit operates at low fan speed to give a gentle cooling 
operation.
4
TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
•  For AUTO, the indoor fan speed is automatically adjusted 
according to the operation mode.
Maximum distances: 8m
(GREEN)
(ORANGE)
5
TO ADJUST AIRFLOW DIRECTION  
(5 OPTIONS)
AIR SWING
•  In COOL mode, if AUTO is set, the louver swing up/down 
automatically.
•  In HEAT mode, if AUTO is set, the horizontal louver fix at 
predetermined position.
6
TO ACHIEVE TEMPERATURE QUICKLY
•  This setting enables the desired set temperature to be 
reached quickly.
7
TO ENJOY QUIET ENVIRONMENT
•  This setting provides a quiet environment by reducing the 
airflow noise.
•  POWERFUL AND QUIET operations can not be activated 
at the same time.
8
PRESS TO RESTORE THE REMOTE CONTROL’S 
DEFAULT SETTING
9
NOT USED IN NORMAL OPERATIONS
Remote Control display
 
(GREEN)
 
(ORANGE)
 
(GREEN)
 
(RED)
1
5
3
6
4
7
2
8
9
01 F568363_EN_CS4.indd   10
2012-2-10   11:06:04