Panasonic DMCGH3EG Operating Guide
85
Snímanie
Snímanie s obľúbenými nastaveniami
(Programy automatickej expozície)
Režim snímania:
Fotoaparát vyhodnotí jas snímaného objektu a na jeho základe automaticky nastaví expozičný
čas a hodnotu clony.
Pri snímaní záberov máte väčšiu voľnosť, pretože v menu snímania [Rec] môžete meniť rôzne
nastavenia.
1
Nastavte ovládač režimov do polohy [ ].
2
85
Recording
Taking Pictures with Your Favourite Settings
(Programme AE Mode)
Recording Mode:
The camera automatically sets the shutter speed and the aperture value according to the
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in the [Rec]
menu.
1
Set the mode dial to [ ].
2
Press the shutter button halfway and display the
aperture value and shutter speed value on the
screen.
aperture value and shutter speed value on the
screen.
•
The shutter speed is automatically set between about
15 seconds and 1/4000th of a second in the following cases.
15 seconds and 1/4000th of a second in the following cases.
–
When the [Sensitivity] is set to [ISO200].
–
When the aperture value is set to F2.8 [when the interchangeable lens (H-HS12035)
is attached].
is attached].
–
When the aperture value is set to F4.0 [when the interchangeable lens (H-VS014140)
is attached].
is attached].
3
While the values are displayed (about 10 seconds), perform
Programme Shift by rotating the rear dial or front dial.
Programme Shift by rotating the rear dial or front dial.
•
Rotate the front/rear dial to display [Expo.Meter] B.
(P58)
•
The Programme Shift indication
A
appears on the screen.
•
To cancel Programme Shift, turn off this unit or rotate the front/rear dial until the
Programme Shift indication disappears.
Programme Shift is easily cancelled by setting [Fn Button Set] on the [Custom] menu to
[One Push AE].
Programme Shift indication disappears.
Programme Shift is easily cancelled by setting [Fn Button Set] on the [Custom] menu to
[One Push AE].
(P43)
60
4.0
2
00
250
15
4.0
2.8
5.6 8.0
30
60
125
0
SS
SS
F
B
A
Stlačte spúšť do polovice a zobrazte hodnotu
clony a expozičný čas.
• Expozičný čas sa automaticky nastaví na hodnotu od
15 sekúnd do 1/4000 sekundy v nasledujúcich prípadoch:
– keď je položka [Sensitivity] (Citlivosť ISO) nastavená na
[ISO200],
– keď je hodnota clony nastavená na F2.8 [keď je nasadený vymeniteľný objektív
(H-HS12035)],
– keď je hodnota clony nastavená na F4.0 [keď je pripevnený vymeniteľný objektív
(H-VS014140)].
3
Počas zobrazenia hodnôt (približne 10 sekúnd) aktivujte otočením
zadného alebo predného otočného ovládača úpravu parametrov
automatickej expozície.
• Otočením predného/zadného otočného ovládača zobrazte [Expo.Meter] (Expozimeter)
B
• Zobrazí sa indikátor funkcie úpravy parametrov automatickej expozície A.
• Ak chcete zrušiť úpravu parametrov automatickej expozície, vypnite fotoaparát alebo
otočením predného/zadného otočného ovládača zrušte indikátor funkcie úpravy
parametrov automatickej expozície.
Funkciu úpravy parametrov automatickej expozície ľahko zrušíte nastavením položky
[Fn Button Set] (Nastavenie funkčného tlačidla) v menu používateľských nastavení
[Custom] na [One Push AE] (Automatická expozícia jedným stlačením). (
)