Panasonic KX-MB2575 Operating Guide
Display
Cause & Solution
“USB MEMORY ACCESS
ERROR”
ERROR”
R The USB memory device was removed while being accessed for reading/
writing. Insert the device and reperform the operation.
R A fault occurred while the USB memory device was being accessed for
reading/writing. Using a computer, check that the device can be read and
written to normally.
written to normally.
“USB MEMORY FILE SIZE
OVER”
OVER”
R There is no space to save new data on the USB memory device. Erase
unnecessary data using your computer.
R When performing scan to USB memory, the total number of scanned pages
has exceeded the limitation. Divide the document into sections.
“USB MEMORY FORMAT
ERROR”
ERROR”
R The media is unformatted or is formatted to an unsupported format (e.g.,
NTFS). Using a computer, format to FAT32. Formatting deletes all data on
the USB memory device. Make sure to back up your data before formatting.
the USB memory device. Make sure to back up your data before formatting.
“USB MEMORY MEDIA ERROR”
R An unsupported USB memory device is connected. Devices with particular
security features or hub features cannot be used.
“USB MEMORY NOT
INSERTED”
INSERTED”
R The USB memory device has been removed from the unit. Reinsert it.
R There is no USB memory device inserted in the unit. Insert one.
R There is no USB memory device inserted in the unit. Insert one.
“USB MEMORY WRITE
PROTECT”
PROTECT”
R The write-protection switch of the USB memory device is in the lock position.
Unlock the switch to allow writing access.
R The save folder in the USB memory device is set to “read only”. Using a
computer, set the save folder to “writable”. (For details about the save folder
name specifications, see page 106.)
name specifications, see page 106.)
113
12. Help