Panasonic KX-MB2575 Operating Guide

Note:
R The count numbers of copies/prints will be reset only

when the mode restriction (feature #154 on
page 105) is activated.

11.6 USB Memory device y

You can print files stored on a USB memory device and
save files to a USB memory device.

Note:
R A mass storage class USB memory device (Format:

FAT12/FAT16/FAT32, sector size: 512 bytes) can be
used with this unit.

R The following types of USB memory devices cannot

be used:
– NTFS formatted devices
– Multiple-LUN (Logical Unit Number) USB flash

memory device

– Multiple-partition USB flash memory device
– devices with a security/encryption feature
– devices with a built-in USB hub feature
Even if your USB memory is not these types, it may
not work with this unit.

R If the USB flash memory device is connected via a

USB hub, the USB flash memory device will not be
recognised. Do not connect via a USB hub.

R To re-connect a USB memory device, make sure to

fully remove the USB memory device before
connecting it again.

R Up to approximately 10 MB of free space may be

required for each scanned page.

R To assure continued emission limit compliance:

– use only USB memory that complies with EMC

standards (Example: CE, FCC)

File folder in a USB memory device
When you save files into the USB memory device, the
following folder is made on the USB memory device.
USB:/(Unit name)/IMAGE/XXXXXXXX
(“XXXXXXXX” is the last 8 digits of the MAC address.)

Important:
R Do not remove the USB memory device or turn

R Be sure to make a backup copy of the data.
R We are not responsible for any damages incurred

R When disposing or giving away the USB memory

11.7 Lower input tray (optional)
y

You can add a lower input tray. See page 13 for
accessory information.

For number of sheets the unit can load, see page 141.
R The unit is set for printing A4-size plain paper by

default.
– To use other paper sizes, change the

– To use other paper types, change the

Important:
R Before starting installation of the lower input tray,

R After installation, you can select the lower input

tray to be used for the following:
– Paper input tray setting for lists and reports

– Paper input tray setting for faxing (feature

#440 on page 83). (y)

– Paper input tray setting for copying (feature

– Paper input tray for PCL (feature #760 on

page 87). (y)

R To use the lower input tray with your computer,

Caution for the lower input tray
R Do not drop the lower input tray.

106