Panasonic KX-MB2575 Operating Guide

#768

“DOWNLOAD FONT” can be selected after the downloaded font is registered to the
unit.
M1N “RESIDENT” (default): The document will be printed using resident font.
M2N “DOWNLOAD FONT”: The document will be printed using download font.

#769

To set the font number to be used in PCL printing. The unit assigns a number to
each font.
1. MtN A MBNM7NM6NM9N A MOKN
2. Enter the font number from “000” to “054”, using the dial keypad.

R The default setting is “000”.

3. MOKN A MtN

Note:
R If the font source in PCL (feature #768 on page 88) is set to “DOWNLOAD

FONT”, the default setting is “001”.

R To print the font list, see page 103.

#770

To set the font pitch/point to be used in PCL printing.
1. MtN A MBNM7NM7NM0N A MOKN
2. Enter the font pitch from “00.44” to “99.99”, or the point from “004.00” to

“999.75”, using the dial keypad.
R The default pitch is “10.00” and the default point is “012.00”.
R Whether this step is font pitch or point depends on the font number

selected in feature #769 (page 88).

3. MOKN A MtN

#771

To set the symbol set to be used in PCL printing.
1. MtN A MBNM7NM7NM1N
2. Press MCN or MDN repeatedly to display the desired symbol set. A MOKN

A MtN

#772

To set each behaviour when receiving CR, LF, and FF codes.
M1N “CR/LF/FF” (default): CR=CR, LF=LF, FF=FF
M2N “CR+LF/LF/FF”: CR=CR+LF, LF=LF, FF=FF
M3N “CR/CR+LF/CR+FF”: CR=CR, LF=CR+LF, FF=CR+FF

#773

To set the length of time before the unit recovers if a memory overflow occurs.
M1N “OFF” (default)
M2N “20s”
M3N “30s”
M4N “60s”
M5N “90s”
M6N “120s”

#774

To change the data timeout setting. The unit will automatically print the remaining
data in memory when the computer does not send data to the unit during the set
time.
1. MtN A MBNM7NM7NM4N A MOKN
2. Enter the desired data timeout setting from “005” seconds to “600” seconds,

using the dial keypad.
R The default setting is “060” seconds.

3. MOKN A MtN

88