Panasonic DPMB300EU Operating Guide
8. Programmable Features
65
Setting the font number in
PCL
{#}{
PCL
{#}{
7}{6}{9}
To set the font number to be used in PCL printing. The unit assigns a number
to each font.
to each font.
1. {
Y} i {#}{7}{6}{9} i {OK}
2. Enter the font number from “
000” to “054”, using the dial keypad.
L
The default setting is “
000”.
3. {OK} i {
Y}
Note:
L
If the font source in PCL (feature #768 on page 64) is set to “
DOWNLOAD
FONT”, the default setting is “001”.
L
To print the font list, see page 98.
Setting the font pitch/point in
PCL
{#}{
PCL
{#}{
7}{7}{0}
To set the font pitch/point to be used in PCL printing.
1. {
Y} i {#}{7}{7}{0} i {OK}
2. Enter the font pitch from “
00.44” to “99.99”, or the point from “004.00”
to “
999.75”, using the dial keypad.
L
The default pitch is “
10.00” and the default point is “012.00”.
L
Whether this step is font pitch or point depends on the font number
selected in feature #769 (page 65).
selected in feature #769 (page 65).
3. {OK} i {
Y}
Setting the symbol set in PCL
{#}{
{#}{
7}{7}{1}
To set the symbol set to be used in PCL printing.
1. {
Y} i {#}{7}{7}{1}
2. Press {V} or {^} repeatedly to display the desired symbol set. i {OK} i
{
Y}
Setting the line breaks in PCL
{#}{
{#}{
7}{7}{2}
To set each behaviour when receiving CR, LF, and FF codes.
{
{
1} “
CR/LF/FF” (default): CR=CR, LF=LF, FF=FF
{
2} “
CR+LF/LF/FF”: CR=CR+LF, LF=LF, FF=FF
{
3} “
CR/CR+LF/CR+FF”: CR=CR, LF=CR+LF, FF=CR+FF
Setting the waiting time for
auto continue mode
{#}{
auto continue mode
{#}{
7}{7}{3}
To set the length of time before the unit recovers if a memory overflow occurs.
{
{
1} “
OFF” (default): Deactivates this feature.
{
2} “
20s”: 20 seconds
{
3} “
30s”: 30 seconds
{
4} “
60s”: 60 seconds
{
5} “
90s”: 90 seconds
{
6} “
120s”: 120 seconds
Changing the data timeout
setting
{#}{
setting
{#}{
7}{7}{4}
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
computer does not send data to the unit during the set time.
1. {
Y} i {#}{7}{7}{4} i {OK}
2. Enter the desired data timeout setting from “
005” seconds to “600”
seconds, using the dial keypad.
L
The default setting is “
060” seconds.
3. {OK} i {
Y}
Setting mutual A4/letter print
{#}{
{#}{
7}{7}{6}
This feature allows printing in A4-size even if letter-size recording paper is
loaded, and vice versa.
{
loaded, and vice versa.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): Printing is possible between A4/letter-size.
Feature/Code
Selection