Panasonic KX-FG2451 Operating Guide
7. Answering Machine
42
Remote Operation
7.5 Operating from a remote
location
location
Important:
L
Program the remote operation ID beforehand
(feature #11 or feature 063 on page 45).
(feature #11 or feature 063 on page 45).
L
Set the unit to TAM/FAX mode before going out
(page 34).
(page 34).
L
Use a touch tone telephone for remote
operations.
operations.
7.5.1 Summary of remote operation
1
Call your unit.
2
Enter the remote operation ID during or after the
TAM/FAX greeting message.
TAM/FAX greeting message.
3
When there are new recorded messages
L
The voice guide will tell you the number of new
messages and they will be played automatically.
messages and they will be played automatically.
When there are no new messages
L
The unit will announce there are no new
messages.
messages.
4
To end remote operation press {9}, then hang up.
Note:
L
When the voice memory is full, the unit will announce
the memory is full after playing back the recorded
messages. Erase any unnecessary messages.
the memory is full after playing back the recorded
messages. Erase any unnecessary messages.
7.5.2 Remote operation using remote
commands
commands
1
Call your unit.
2
Enter the remote operation ID during or after the
TAM/FAX greeting message.
TAM/FAX greeting message.
3
Enter a remote command within 10 seconds.
Note:
L
When you press a key, press firmly.
*1 If pressed within the first 5 seconds of a message,
the previous message will be played.
*2 To resume operation, press a command key within
10 seconds, otherwise the marker message
recording will start.
recording will start.
Recording a marker message
After playing back the messages, you can leave an
additional message.
After playing back the messages, you can leave an
additional message.
1. Wait for the voice guide.
Voice guide:
“All messages have been played.”
“All messages have been played.”
2. Wait about 10 seconds.
Voice guide:
“Please leave your name and message after the
beep.”
“Please leave your name and message after the
beep.”
3. Leave a message after the beep.
To turn ON the auto answer setting
1. Call your unit and let it ring 10 rings.
L
The answering machine will temporarily answer
the call.
the call.
2. Enter the remote operation ID during or after the
greeting message.
L
A long beep will sound, and the receiving mode
will be set to TAM/FAX.
will be set to TAM/FAX.
3. Press {9}, then hang up the handset.
Key
Remote command
{
1}
Repeats a message (during
playback)
playback)
{
2}
Skips a message (during playback)
{
4}
Plays new messages
{
5}
Plays all messages
{
7}
Records greeting message
{
9}
Stops current operation
{
0}
Turns OFF auto answer setting
{*}{
4}
Erases a specific message (during
playback)
playback)
{*}{
5}
Erases all messages
{#}
Skips the greeting message
FG2451-PFQX2417ZA-en.book Page 42 Tuesday, March 7, 2006 9:19 AM