Panasonic KX-PS8000 Manual

Scanner is reserved by
other device!

Scanner is reserved by
other application!

Scanner is being used by another
device.

Scanner is being used by another
application.

B

Rescan later when the scanner is free
from other jobs.

B

Close the application which controls the
scanner, turn off the system
(scanner/printer/computer), then turn it
on again.

B

Rescan later when the scanner is free
from other jobs.

B

Rescan after closing the application
which controls the scanner.

B

Close the application, turn off the
system (scanner/printer/computer), then
turn it on again.

PTAB3D.DLL was not
found!!

Power Off or Cable Error!
Check that the scanner is
powered on, and the
SCSI cable is connected
correctly.

Close the application which controls the
scanner driver, turn off the system
(scanner/printer/computer), then turn on
again.

The scanner is not recognized.

The file Ptab3d.dll is not found.

Reinstall the KX-PS8000 software.

winaspi.dll is not found.

SCSI board is not correctly set.

Correctly set the SCSI board in the
computer. (Refer to the instructions
manual of the SCSI board.)
For any other trouble related to SCSI,
refer to the SCSI section of
Troubleshooting