Panasonic KXFC195GRG Operating Guide
7. Programmable Features
57
7.5 Handset programming
using the base unit PIN
using the base unit PIN
To exit programming, press {ih} any time.
Select Dialling Mode
If you cannot dial, change this setting depending
on your telephone line service.
If you cannot dial, change this setting depending
on your telephone line service.
L
You must set the dialling mode for both the
handset and the base unit (feature #13, page
49).
handset and the base unit (feature #13, page
49).
1. Press {j}.
2. Press {v} or {e} repeatedly to display
“SETTING BS”.
3. Press {>}.
“INPUT CODE” will be displayed.
4. Press {3}.
5. Enter 4-digit base unit PIN.
L
The default PIN is “0000”.
6. Press {1}.
7. To select tone, press {1}.
To select pulse, press {2}.
8. Press {>} or {j}.
9. Press {ih}.
Changing base unit PIN
The base unit’s PIN is set at the factory to
“0000”. If you change the PIN, please write
down your new PIN as the unit will not reveal
the PIN to you. If you forget your PIN, consult
your nearest Panasonic service centre.
The base unit’s PIN is set at the factory to
“0000”. If you change the PIN, please write
down your new PIN as the unit will not reveal
the PIN to you. If you forget your PIN, consult
your nearest Panasonic service centre.
1. Press {j}.
2. Press {e} or {v} repeatedly to display
“SETTING BS”.
3. Press {>}.
L
“INPUT CODE” will be displayed.
4. Press {5}.
5. Enter the current 4-digit base unit PIN.
6. Enter the new 4-digit base unit PIN.
7. Enter the new 4-digit base unit PIN again to
verify.
8. Press {ih}.
Setting call restriction
You can restrict selected handset(s) from dialling
selected phone numbers. You can assign up to
10 call restriction numbers (up to 8 digits). If you
dial a restricted number, the call will not be
connected and the restricted number will flash
on the display.
You can restrict selected handset(s) from dialling
selected phone numbers. You can assign up to
10 call restriction numbers (up to 8 digits). If you
dial a restricted number, the call will not be
connected and the restricted number will flash
on the display.
1. Press {j}.
2. Press {e} or {v} repeatedly to display
“SETTING BS”.
3. Press {>}.
L
“INPUT CODE” will be displayed.
4. Press {6}.
5. Enter the 4-digit base unit PIN.
L
The default PIN is “0000”.
L
All the registered handset numbers are
displayed.
displayed.
L
If you programmed previously, the pre-
selected handset number flashes.
selected handset number flashes.
6. Press the desired handset number(s).
L
The selected handset number will flash.
L
To cancel the selected handset number,
press the number again. The number will
stop flashing.
press the number again. The number will
stop flashing.
7. Press {>}.
8. Enter the phone number to be restricted, up
to 8 digits.
L
9. Press {>} or {j}.
L
To enter other numbers, repeat steps 8
and 9 (up to 10 numbers).
and 9 (up to 10 numbers).
10. Press {ih}.
Turning off/on call restriction
1. Press {j}.
2. Press {e} or {v} repeatedly to display
“SETTING BS”.
3. Press {>}.
L
“INPUT CODE” will be displayed.
4. Press {6}.
5. Enter the 4-digit base unit PIN.
L
The default PIN is “0000”.
6. Press the desired handset number.
L
Handset numbers will be displayed.
Flashing numbers indicate call restriction
is on; non-flashing numbers indicate call
Flashing numbers indicate call restriction
is on; non-flashing numbers indicate call
{>}{e}{v}
{
C}
{j}
{ih}
FC195GR.book Page 57 Wednesday, April 2, 2003 11:39 AM