Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. KXFC238FX
  5. Operating Guide

Panasonic KXFC238FX Operating Guide

Download
Page of 114
9. Programmable Features
79
Storing/changing emergency numbers
These settings determine which telephone 
numbers can be dialled while the call bar feature 
is ON (page 77).
1. Press {j/OK}.
2. Select “
Base Unit Setup”, then press 
{>}
.
3. Enter “
0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 79).
4. Select “
Call Options”, then press {>}.
5. Select “
Emergency No.”, then press {>}.
6. Select a memory location, then press {>}.
L
If the memory location already contains 
an emergency number, the number is 
displayed.
7. Enter/edit the number, then press {j/OK}.
L
To erase an emergency number, press 
and hold {C/T}.
8. Press {ih}.
Setting call restriction
You can restrict selected handsets from dialling 
certain numbers. You can assign up to 6 phone 
numbers to be restricted, and select which 
handsets will be restricted. Storing area codes 
here will prevent the restricted handsets from 
dialling any phone number in that area code. If a 
restricted number is dialled, the call will not be 
connected and the restricted number will flash 
on the display.
1. Press {j/OK}.
2. Select “
Base Unit Setup”, then press 
{>}
.
3. Enter “
0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 79).
4. Select “
Call Options”, then press {>}.
5. Select “
Call Restrict”, then press {>}.
6. Set which handsets will be restricted by 
pressing the desired handset number.
L
All the registered handset numbers will be 
displayed.
L
Flashing numbers indicate call restriction 
is turned ON for the corresponding 
handset.
L
To turn call restriction OFF for a handset, 
press the number again. The number will 
stop flashing.
7. Press {j/OK}.
8. Select a memory location, then press {>}.
L
If the memory location already contains a 
restricted number, the number is 
displayed.
9. Enter the phone number or area code to be 
restricted (up to 8 digits), then press 
{j
/OK}.
L
To erase a restricted number, press 
{
C/T}.
10. Press {ih}.
9.5.10 Other options
Changing the base unit PIN (personal 
identification number)
For security, the base unit PIN must be entered 
when changing certain settings. The default PIN 
is “
0000”.
Important:
L
If you change the PIN, please make note of 
your new PIN. The unit will not reveal the 
PIN to you. If you forget your PIN, consult 
your nearest Panasonic service centre.
1. Press {j/OK}.
2. Select “
Base Unit Setup”, then press 
{>}
.
3. Enter “
0000” (default base unit PIN).
L
If you changed the PIN, enter it.
4. Select “
Other Options”, then press {>}.
5. Select “
Base Unit PIN”, then press {>}.
6. Enter the new 4-digit base unit PIN, then 
press {j/OK}.
7. Press {ih}.
Resetting handset programming that uses 
the base unit PIN
Handset programming that uses the base unit 
PIN will be reset (page 73).
1. Press {j/OK}.
2. Select “
Base Unit Setup”, then press 
{>}
.
3. Enter “
0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 79).
4. Select “
Other Options”, then press {>}.
5. Select “
Reset Base”, then press {>}.
6. Select “
Yes”, then press {>}.
7. Press {ih}.
Note:
L
The following items will also be deleted or 
reset to their default settings:
–
All SMS-related settings and messages 
(page 38)
FC238FX-PFQX2261ZA_en.book  Page 79  Monday, June 20, 2005  1:30 PM