Panasonic KXHNH100FX Operating Guide
turn it off; if there is a “SSID broadcast”
setting, turn it on. Change the appropriate
setting before performing this procedure,
and then change it back when finished.
setting, turn it on. Change the appropriate
setting before performing this procedure,
and then change it back when finished.
Wi-Fi network access settings
1
1
M
N#523
R The hub searches for available
wireless networks and
“Searching...” is displayed on the
handset.
“Searching...” is displayed on the
handset.
R When searching is complete, a list of
available wireless networks is
displayed, including the SSID, security
setting, and signal strength.
displayed, including the SSID, security
setting, and signal strength.
2
MbN: Select your wireless router’s SSID.
a MOKN
a MOKN
3
Confirm the SSID and then press MOKN.
4
Enter the password required to access
the wireless network. a MOKN
R For information about entering
the wireless network. a MOKN
R For information about entering
R After the hub connects to the wireless
router, “Connected to” and your
wireless router’s SSID is displayed.
wireless router’s SSID is displayed.
5
MeN
Advanced configuration (static IP
settings)
settings)
After using the procedure explained in “Wi-Fi
network access settings”, page 32, use the
procedure below to set the hub’s IP settings
manually if necessary.
This procedure is not necessary for most
users.
network access settings”, page 32, use the
procedure below to set the hub’s IP settings
manually if necessary.
This procedure is not necessary for most
users.
1
M
N#500
2
MbN: “Manual (Static)” a MOKN
3
MbN: Select the desired item. a MOKN
4
Enter the desired setting. a MOKN
R Press MFEN to move the cursor if
R Press MFEN to move the cursor if
necessary.
5
Set the other items as necessary.
6
M
N a MeN
Confirming network status
1
1
M
N#526
2
MbN and MFEN: Display the desired
information. a MeN
information. a MeN
Resetting the hub’s network
settings
settings
All network-related settings will be reset to the
default settings. No other information will be
deleted.
default settings. No other information will be
deleted.
1
M
N#730
2
Enter the hub PIN (default: “0000”).
3
MOKN
R The hub restarts. Wait until the hub
R The hub restarts. Wait until the hub
LED indicator lights in yellow and then
set the Wi-Fi network access settings
using Home Network app. For more
information, refer to the User’s Guide
(page 42).
set the Wi-Fi network access settings
using Home Network app. For more
information, refer to the User’s Guide
(page 42).
32
Programming