Panasonic DPMB545SX Operating Guide

Important notice
When installing using a USB cable connection, a
message may appear during the software
installation. This is normal and the software will
not cause any difficulties with your operating
system. You can continue the installation with no
problem. This kind of message is displayed:
• For Windows XP users

“The software you are installing for this
hardware has not passed Windows Logo
testing to verify its compatibility with Windows
XP.”

• For Windows Vista/Windows 7/Windows 8/

Windows 10 users
“Would you like to install this device software?”

• It is recommended to connect the unit to the

wireless network before installation.
For information about configuring wireless LAN
settings, please refer to "2.6 Wireless LAN
settings 

", page 31.

[Easy Installation (Wireless LAN)]

Select 

[Already set up wireless LAN]

.

• The installation will start automatically.

When the setup program starts, follow the on-
screen instructions.
• Easy Print Utility and Device Monitor will also

be installed.

The 

[Select a Network Device]

 dialogue box

appears.
1.

Check 

[Select from the search list]

 and

select the unit from the list.
• If the name of the desired unit is not

displayed on the list, and the IP address
for the unit has been assigned, check

[Direct input]

 and enter the IP address.

[Next]

Click 

[Install]

, then follow the on-screen

instructions.

[Easy Installation (Wireless LAN)]

Select 

[Not yet set up wireless LAN]

.

• The installation will start automatically.

• The USB cable is required for

When the setup program starts, follow the on-
screen instructions.
• Easy Print Utility and Device Monitor will also

be installed.

The 

[Connect Device]

 dialogue box appears.

Connect the unit to a computer with the
USB cable, then click 

[Next]

.

• If the unit is connected to your computer,

the model name will be automatically
detected.

Click 

[Install]

, then follow the on-screen

instructions.

When Wireless LAN Setting tool is launched,
follow the on-screen instructions to configure the
wireless LAN settings.

Start Windows and insert the supplied CD-ROM
into your CD-ROM drive.

Click 

[Operating Instructions]

, then follow the

on-screen instructions to view or install the
operating instructions in PDF format.
• Adobe

®

 Reader

®

 is required to view the

operating instructions.

• If you install the operating instructions, you can

view it anytime by clicking 

[Help]

 on the Multi-

Function Station launcher.

You need to add the printer driver for each unit, as
follows.

Start Windows and insert the supplied CD-ROM
into your CD-ROM drive.

[Modify]

 

 

[Add Driver]

 

 

[Add Multi-

Function Station Driver]

. Then follow the on-

screen instructions.

• You cannot connect more than one unit to the

same computer at the same time (USB
connection only).

34

Operating Instructions