Panasonic CZ256ESMC2 Operating Guide
15
6.1 Powering the System On
Check the wiring, (air conditioners, communication adaptors, etc.) and then turn the power switch on
(see page 12). The system starts automatically.
When the system is powered on for the fi rst time, about 10 minutes are required for the normal
system screen to appear. Wait until it appears.
(see page 12). The system starts automatically.
When the system is powered on for the fi rst time, about 10 minutes are required for the normal
system screen to appear. Wait until it appears.
6.2 Names and Functions of Screen Parts
6.2.1 Initial communications screen
The fi gure below shows the initial communications screen, which appears when the Intelligent
Controller starts.
Controller starts.
System power off procedure
Always use the following procedure to power the Intelligent Controller off.
In the “Other settings” menu (
Main
Sub
6
6
9
9
), select the last item, Power off .
The message “Exit this program?” appears. Press the OK button.
The message “It is now safe to turn off the Intelligent Controller.” appears (
∗ ). Turn the power off.
(
∗ Several minutes may be required before the message appears.)
6 Using the System
CZ-256ESMC2_EN.indb 15
CZ-256ESMC2_EN.indb 15
3/31/2011 2:02:57 PM
3/31/2011 2:02:57 PM