Panasonic KXTGE220E Operating Guide
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*4 The preset melodies in this product (“Ringtone 3” - “Ringtone 40”) are used with
permission of © 2012 Copyrights Vision Inc.
*5 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*6 This setting is available when you have the key finder (KX-TGA20EX). Read the installation
manual for more information on the key finder.
*7 For models with supplied key finders, the display shows “1:Finder1”.
*8 If you register 2 or more key finders.
*9 If you have 2 or more key finders.
*10 This menu is not displayed when repeater mode is set to “On”.
*11 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
*8 If you register 2 or more key finders.
*9 If you have 2 or more key finders.
*10 This menu is not displayed when repeater mode is set to “On”.
*11 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*12 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*13 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*14 This menu icon is displayed when the key finder is not registered.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
is correct (page 14).
1
MMENUN#720
2
Select an alarm by pressing 1 to 3. a
MOKN
MOKN
3
MbN: Select the desired alarm option. a
MOKN
MOKN
“Off”
Turns alarm off. Go to step 9.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
Go to step 5.
“Weekly”
Alarm sounds weekly at the set time(s).
Turns alarm off. Go to step 9.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
Go to step 5.
“Weekly”
Alarm sounds weekly at the set time(s).
4
Once:
Enter the desired date and month. a
MOKN
Enter the desired date and month. a
MOKN
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
29
Programming
TGE2xxE_(en_en)_0307_ver.030.pdf 29
2014/03/07 15:08:32