Panasonic KXFC962FX Operating Guide
8. Answering Machine
56
Incoming Messages
8.2 Listening to recorded
messages with the base
unit
messages with the base
unit
When the unit has recorded new voice
messages:
–
messages:
–
The {AUTO ANSWER} indicator will flash
when the auto answer setting is turned ON.
when the auto answer setting is turned ON.
–
The total number of recorded messages will
flash on the base unit display.
flash on the base unit display.
–
the base unit beeps slowly if the message
alert feature (feature #42 on page 65) has
been turned ON.
Example:
alert feature (feature #42 on page 65) has
been turned ON.
Example:
Press {PLAYBACK}.
L
Only new messages will be played.
L
Adjust the speaker volume using {A} or {B}.
L
After playing back all of the new messages;
–
–
the {AUTO ANSWER} indicator will stop
flashing but will remain lit up when the
auto answer setting is turned ON.
flashing but will remain lit up when the
auto answer setting is turned ON.
–
the total number of recorded messages
will stop flashing and remain displayed.
If you press {PLAYBACK} at this time, all
recorded messages will be played.
will stop flashing and remain displayed.
If you press {PLAYBACK} at this time, all
recorded messages will be played.
Note:
L
The total recording time of all messages
(incoming and recorded conversation) is
about 15 minutes. A maximum of 50
messages can be recorded. If messages are
recorded in noisy environment, the actual
recording time may be less.
(incoming and recorded conversation) is
about 15 minutes. A maximum of 50
messages can be recorded. If messages are
recorded in noisy environment, the actual
recording time may be less.
To repeat a message
Press {<} while listening to the message.
L
If you press {<} within 5 seconds of the
beginning of the message, the previous
message will be played.
beginning of the message, the previous
message will be played.
L
To play back a specific message, press {<}
or {>} and search for the message you want
to listen to.
or {>} and search for the message you want
to listen to.
To skip a message
Press {>} to play the next message.
To stop playback
Press {STOP}.
8.2.1 Erasing recorded
messages
messages
To erase a specific message
Press {ERASE} while listening to the message
you want to erase.
Press {ERASE} while listening to the message
you want to erase.
To erase all messages
1
Press {ERASE} while the unit is idle.
L
To cancel erasing, press {STOP}.
2
Press {ERASE}.
02
{
PLAYBACK}
{A}{B}{<}{>}
{
ERASE}
{
STOP}
FC962FX-PFQX2294ZA-en.book Page 56 Friday, August 26, 2005 9:05 PM