Panasonic KXFC962FX Operating Guide

Page of 108
7
1. Installation and Quick Start
Connections and Setup
1.4 Connections
Important:
L
The unit will not function when there is a 
power failure. To make calls in emergency 
situations, you should connect a 
telephone that can function during a 
power failure to the telephone line.
1.4.1 Base unit
Caution:
L
When you operate this product, the power 
outlet should be near the product and 
easily accessible.
L
Be sure to use the telephone line cord 
included in this unit.
L
Do not extend the telephone line cord.
L
Keep the base unit away from walls as far 
as possible to prevent a recording paper 
jam.
Note:
L
Before you can make calls, the dialling mode 
setting may need to be changed (page 19).
1.4.2 Charger unit
Caution:
L
USE ONLY WITH the included Panasonic 
AC adaptor.
L
The AC adaptor must remain connected at 
all times. (It is normal for the adaptor to 
feel warm during use.)
L
The AC adaptor should be connected to a 
vertically oriented or floor-mounted AC 
outlet. Do not connect the AC adaptor to a 
ceiling-mounted AC outlet, as the weight 
of the adaptor may cause it to become 
disconnected.
1 Paper stacker
L
The paper stacker will drop to a lower 
angle after inserting into the base unit.
L
The paper stacker may not be shown in 
all illustrations in these operating 
instructions.
2 Power cord
L
Connect to the power outlet (220 V – 
240V, 50/60 Hz).
3 Telephone line cord
L
Connect to [LINE] jack and a single 
telephone line jack.
[EXT] jack
L
Remove the stopper if attached.
L
Use only to connect extension 
telephones for access to emergency 
services during power failure.
5 Handset cord
6 Extension telephone (not included)
1
5
4
6
3
2
1 Hooks
L
Fasten the AC adaptor cord to prevent it 
from being disconnected.
2 AC adaptor
L
Connect to the power outlet (220 V – 240 
V, 50/60 Hz).
2
1
FC962FX-PFQX2294ZA-en.book  Page 7  Friday, August 26, 2005  9:05 PM