Panasonic KXFC243FX Operating Guide
13. General Information
105
Specifications
13.2 Specifications
13.2.1 Base unit
■ Applicable lines:
Public Switched Telephone Network
■ Document size:
Max. 216 mm in width, Max. 600 mm in length
■ Effective scanning width:
208 mm
■ Effective printing width:
A4: 202 mm
■ Transmission time
Public Switched Telephone Network
■ Document size:
Max. 216 mm in width, Max. 600 mm in length
■ Effective scanning width:
208 mm
■ Effective printing width:
A4: 202 mm
■ Transmission time
:
Approx. 8 s/page (ECM-MMR)
■ Scanning density:
Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm – in standard resolution,
7.7 lines/mm – in fine/photo resolution,
15.4 lines/mm – in super fine resolution
■ Photo resolution:
64-level
■ Scanner type:
Contact Image Sensor
■ Printer type:
Thermal Transfer on plain paper
■ Data compression system:
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
■ Modem speed:
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400
bps; Automatic Fallback
■ Operating environment:
5
Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm – in standard resolution,
7.7 lines/mm – in fine/photo resolution,
15.4 lines/mm – in super fine resolution
■ Photo resolution:
64-level
■ Scanner type:
Contact Image Sensor
■ Printer type:
Thermal Transfer on plain paper
■ Data compression system:
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
■ Modem speed:
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400
bps; Automatic Fallback
■ Operating environment:
5
°C – 35 °C, 20 % – 80 % RH (Relative
Humidity)
■ Dimensions:
Approx. height 139 mm
■ Dimensions:
Approx. height 139 mm
× width 331 mm × depth
238 mm
■ Mass (Weight):
Approx. 3.1 kg
■ Power consumption:
Standby: Approx. 4.5 W
Transmission: Approx. 15 W
Reception: Approx. 35 W (When receiving a 20
% black document)
Copy: Approx. 40 W (When copying a 20 % black
document)
Maximum: Approx. 130 W (When copying a 100
% black document)
■ Power supply:
220 V – 240 V AC, 50/60 Hz
■ Mass (Weight):
Approx. 3.1 kg
■ Power consumption:
Standby: Approx. 4.5 W
Transmission: Approx. 15 W
Reception: Approx. 35 W (When receiving a 20
% black document)
Copy: Approx. 40 W (When copying a 20 % black
document)
Maximum: Approx. 130 W (When copying a 100
% black document)
■ Power supply:
220 V – 240 V AC, 50/60 Hz
■ Fax memory capacity
Approx. 25 pages of memory transmission
Approx. 28 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard
resolution, without using the Error Correction
Mode.)
■ Voice memory capacity
Approx. 28 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard
resolution, without using the Error Correction
Mode.)
■ Voice memory capacity
:
Approx. 30 minutes of recording time including
greeting messages
greeting messages
*1 Transmission speed depends upon the
contents of the pages, resolution, telephone
line conditions and capability of the other
party’s machine.
line conditions and capability of the other
party’s machine.
*2 Transmission speed is based upon the ITU-T
No. 1 Test Chart. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
party’s machine is inferior to your unit, the
transmission time may be longer.
*3 If an error occurs during fax reception, such
as a paper jam or if the recording paper runs
out, the fax and subsequent faxes will be
retained in memory.
out, the fax and subsequent faxes will be
retained in memory.
*4 Recording time may be reduced by the
calling party’s background noise.
ITU-T No. 1 Test Chart
Recording paper specifications
Recording paper size: A4: 210 mm
× 297 mm
Recording paper weight: 64 g/m
2
to 80 g/m
2
Note for recording paper:
L
Do not use the following types of paper:
–
–
Paper with a cotton and/or fibre content
that is over 20 %, such as letterhead
paper or paper used for resumes
that is over 20 %, such as letterhead
paper or paper used for resumes
–
Extremely smooth or shiny paper, or
paper that is highly textured
paper that is highly textured
–
Coated, damaged or wrinkled paper
–
Paper with foreign objects attached, such
as tabs or staples
as tabs or staples
–
Paper which has dust, lint or oil stains
FC243FX-PFQX2104ZA_en.book Page 105 Tuesday, November 2, 2004 2:10 PM