Panasonic KXFP373FX Operating Guide
7. Programmable Features
37
7.3 Advanced features
Feature
Feature code
Selection
Setting the journal
report to print
automatically
report to print
automatically
{#}{
2}{2}
{
0} “
OFF”: The unit will not print a journal report, but will keep a
record of the last 30 fax transmissions and receptions.
{
{
1} “
ON” (default): The unit will print a journal report automatically
after every 30 new fax transmissions and receptions (page 21).
Sending documents
overseas
overseas
{#}{
2}{3}
If you cannot send a fax overseas even if the number is correct
and the line is connected, activate this feature before sending the
fax.
This feature improves the reliability by reducing the transmission
speed.
{
and the line is connected, activate this feature before sending the
fax.
This feature improves the reliability by reducing the transmission
speed.
{
0} “
OFF”: Deactivates this feature.
{
1} “
NEXT FAX”: This setting is effective only for the next
attempted fax transmission. After transmission, the unit will return
to the previous setting.
{
to the previous setting.
{
2} “
ERROR” (default): When the previous fax transmission fails
and you wish to re-send the document.
Note:
L
Calling charges may be higher than usual.
Sending a fax at a
specified time
specified time
{#}{
2}{5}
This feature allows you to take advantage of low-cost calling
hours offered by your telephone company. This feature can be set
up to 24 hours in advance of the desired time.
{
hours offered by your telephone company. This feature can be set
up to 24 hours in advance of the desired time.
{
0} “
OFF” (default)
{
1} “
ON”
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to select the
desired resolution (page 21).
3. {MENU} i {#}{2}{5}
4. Press {1} to select “
ON”. i {SET}
5. Enter the fax number. i {SET}
6. Enter the transmission start time.
L
If you selected 12 hour clock format (page 14), press {*}
repeatedly to select AM or PM.
repeatedly to select AM or PM.
L
If you selected 24 hour clock format (page 14), the time is
set using 24 hour clock format.
set using 24 hour clock format.
7. {SET} i {MENU}
Note:
L
To cancel after programming, press {STOP} then {SET}.
L
If you change the date and time (feature #01 on page 14) after
programming, this feature will be turned OFF automatically.
programming, this feature will be turned OFF automatically.
Setting the Caller ID list
to print automatically
to print automatically
{#}{
2}{6}
{
0} “
OFF” (default): The Caller ID list will not be printed
automatically, but the unit will keep a record of the information for
the last 30 different callers.
{
the last 30 different callers.
{
1} “
ON”: The Caller ID list will be printed automatically each time
the unit logs 30 different callers (page 19).
FP373FX-PNQX1826ZA-OI-en.book Page 37 Thursday, November 6, 2008 11:23 AM