Panasonic KXFC245E Operating Guide
4. Telephone
44
4.14.5 Editing the sender’s
number before calling back
number before calling back
1
While reading a received message, press
*
*
(centre of joystick).
2
Select “
Edit for Call”, then press ,.
3
Edit the number, then press {C}, {s}, or
,
,
to call.
4.15 Guide to SMS
settings
settings
L
Keep the front cover page open for button
locations.
locations.
4.15.1 Turning SMS ON/OFF
1
Press $ (centre of joystick).
2
Select }, then press ,.
3
Select “
Parameters”, then press ,.
4
Enter “
0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 82).
5
Select “
SMS On/Off”, then press ,.
6
Select “
On” or “Off”, then press ,.
7
Press {ih}.
Note:
L
If you try to send a message while SMS is
turned OFF, a tone sounds and the message
is placed in the receive list with “
turned OFF, a tone sounds and the message
is placed in the receive list with “
FD”
attached to it.
L
If someone tries to send you a message
while SMS is turned OFF, the message will
not be received and the message centre
number will be logged in the Caller ID list.
while SMS is turned OFF, the message will
not be received and the message centre
number will be logged in the Caller ID list.
4.15.2 Changing SMS message
centre numbers
centre numbers
SMS message centre telephone numbers must
be stored in order to send and receive SMS
messages.
The following numbers (used for SMS services
provided by BT Text) are preprogrammed in this
unit. You can change them if necessary.
–
be stored in order to send and receive SMS
messages.
The following numbers (used for SMS services
provided by BT Text) are preprogrammed in this
unit. You can change them if necessary.
–
Message Centre 1: 1470PP17094009 (“P”
indicates a dialling pause.)
indicates a dialling pause.)
–
Message Centre 2: 0800587529
Message Centre 1 is used for sending SMS
messages, and Message Centre 2 is used for
receiving messages.
messages, and Message Centre 2 is used for
receiving messages.
L
Consult your service provider for more
information.
information.
1
Press $ (centre of joystick).
2
Select }, then press ,.
3
Select “
Parameters”, then press ,.
4
Enter “
0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 82).
FC245E_en.book Page 44 Wednesday, August 4, 2004 9:47 PM