Panasonic KXFC245E Operating Guide
8. Programmable Features
70
8.2 Basic features
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 27 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 28 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 29 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR
[
±]
ERROR” (default): A sending report will be
printed only when fax transmission fails.
“
“
ON”: A sending report will be printed after every
transmission.
“
“
OFF”: Sending reports will not be printed.
Code #06: Changing the ring setting in FAX
ONLY mode
ONLY mode
FAX RING COUNT
RINGS=2
[
±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “
answers a call in FAX ONLY mode.
You can select “
1”, “2” (default), “3”, “4”, “5”,
“
6”, “7”, “8” or “9”.
Note:
L
Set feature #77 to “
FAX ONLY” (page 73)
beforehand.
Code #06: Changing the ring setting in
TAM/FAX mode
TAM/FAX mode
TAM RING COUNT
RINGS=2
[
±]
To change the number of rings before the unit
answers a call in TAM/FAX mode. You can select
“
answers a call in TAM/FAX mode. You can select
“
2” (default), “3”, “4”, “5”, “6”, “7” or “AUTO”.
See page 56 for details.
Note:
L
Set feature #77 to “
TAM/FAX” (page 73)
beforehand.
L
You can also program this feature with the
cordless handset (page 65).
cordless handset (page 65).
Code #10: Changing the maximum recording
time for incoming messages
time for incoming messages
RECORDING TIME
=NO LIMIT
[
±]
“
1 MINUTE”: Up to 1 minute.
“
NO LIMIT” (default): Unlimited within the voice
memory capacity (page 110).
“
“
GREETING ONLY”: The unit plays the greeting
message but does not record caller messages.
Note:
L
You can also program this feature with the
cordless handset (page 65).
cordless handset (page 65).
Code #11: Setting the remote operation ID
REMOTE TAM ID
ID=
A 3-digit remote operation ID must be entered
when operating the answering system remotely.
This ID prevents unauthorised parties from
listening to your messages remotely. After you
store your remote operation ID, remote operation
is possible.
when operating the answering system remotely.
This ID prevents unauthorised parties from
listening to your messages remotely. After you
store your remote operation ID, remote operation
is possible.
1. Press {MENU}.
2. Press {#}, then {1}{1}.
3. To activate the remote operation feature,
enter a 3-digit remote operation ID.
L
To deactivate the remote operation
feature, press {*}.
feature, press {*}.
4. Press {SET}.
5. Press {MENU}.
Note:
L
You can also program this feature with the
cordless handset (page 65).
cordless handset (page 65).
Code #17: Setting the ringer type for outside
calls
calls
EXT RINGER TYPE
=RINGER 1
[
±]
To set the base unit ringer type from one of 6
types for outside calls. You can select “
types for outside calls. You can select “
RINGER
1” (default), “RINGER 2”, “RINGER 3”,
“
“
RINGER 4”, “RINGER 5” or “RINGER 6”.
Note:
L
To set the cordless handset ringer type, see
page 77.
page 77.
FC245E_en.book Page 70 Wednesday, August 4, 2004 9:47 PM