Panasonic PTL720E Operating Guide

E

NGLISH

-23

22-E

NGLISH

1

6

2

3

4

5

ON

DIP

D-sub 9-pin
(male)

Computer for

control use

Computer

NOTE:
B It is better to shut down the computer before turning off the MAIN POWER

switch of the projector.

B Refer to the list of compatible signals on page 56 for the types of RGB

signals which can be input to the projector by connecting a computer.

B Do not input the signal to the RGB2 IN/RGB1 OUT connector when the

RGB2 SELECT item in the OPTION1 menu is set to OUTPUT. (Refer to
page 40.)

Monitor

D-sub 15 (male) - BNC5 (female)
adapter cable (sold separately)

Red (connect to P

R

signal connector)

Blue (connect to P

B

signal connector)

Green (connect to Y signal connector)

Digital broadcast
tuner or DVD player

D-sub 9-pin
(male)

DVD player

Audio system

Video deck

NOTE:
B Only one audio system circuit is available for the AUDIO IN L-R jacks for

S-VIDEO/VIDEO signals, so if you wish to change the audio input source,
you will need to remove and insert the appropriate plugs.

B Only one audio system circuit is available for the RGB AUDIO IN jacks, so

if you wish to change the audio input source, you will need to remove and
insert the appropriate plugs.

B If an audio system is connected to the AUDIO OUT jack, the sound

volume balance can be controlled by the remote control unit which is
supplied with the projector.

B If the video signal source is connected using a cable with a BNC

connector plug, use a BNC/RCA adapter (sold separately) to convert the
cable end to an RCA plug-type jack.

B Refer to page 56 for a list of compatible YP

B

P

R

signals which can be input

to the projector.

B If the signal cables are disconnected or if the power supply for the

computer or video deck is turned off while the digital zoom or index
window functions are being used, these functions will be cancelled.

Computer for

control use

Audio system