Panasonic KXTGF383 Operating Guide
Handset
1
Press MMENUN on the handset being
monitored.
monitored.
2
MbN: “On/Off” a MSELECTN
3
MbN: “Off” a MSELECTN a MOFFN
Editing an outside monitoring number
Handset
1
Press MMENUN on the handset being
monitored.
monitored.
2
MbN: “On/Off” a MSELECTN
3
MbN: “On” a MSELECTN
4
MbN: Select the outside line. a MEDITN
5
MMENUN a MbN: “Edit” a MSELECTN
6
Edit the name if necessary. a MOKN
7
Edit the phone number if necessary. a MOKN
a MSELECTN
a MSELECTN
Erasing an outside monitoring number
Handset
1
Press MMENUN on the handset being
monitored.
monitored.
2
MbN: “On/Off” a MSELECTN
3
MbN: “On” a MSELECTN
4
MbN: Select the outside line. a MEDITN
5
MMENUN a MbN: “Erase” a MSELECTN
6
MbN: “Yes” a MSELECTN a MOFFN
Baby monitor sensitivity
You can adjust the sensitivity of the baby monitor.
Increase or decrease the sensitivity to adjust the
sound level needed to trigger the baby monitor
feature.
R This feature cannot be set during a monitoring
You can adjust the sensitivity of the baby monitor.
Increase or decrease the sensitivity to adjust the
sound level needed to trigger the baby monitor
feature.
R This feature cannot be set during a monitoring
call.
Handset
1
Press MMENUN on the handset being
monitored.
monitored.
2
MbN: “Sensitivity level” a MSELECTN
3
MbN: Select the desired setting. a MSAVEN
a MOFFN
a MOFFN
Answering the baby monitor
Handset / Base unit
n
When monitoring with a unit:
Handset: Press M
Handset: Press M
N to answer a call.
Base unit: Press M N to answer a call.
If you want to respond from the monitoring unit,
press MMUTEN.
R The monitoring unit will answer calls
If you want to respond from the monitoring unit,
press MMUTEN.
R The monitoring unit will answer calls
automatically when the auto intercom feature
is set to “On” (page 27).
is set to “On” (page 27).
Note:
R If you receive an outside call when
R If you receive an outside call when
communicating with the monitored handset,
the interrupt tone sounds.
– To answer the call with the handset, press
the interrupt tone sounds.
– To answer the call with the handset, press
MOFFN, then press M
N.
– To answer the call with the base unit, press
M N 3 times.
*1 If MMUTEN is pressed, press MZN 2 times.
n
When monitoring from an outside line:
Answer the call.
If you want to respond from your monitoring
phone, press #1 using tone dialing.
You can turn off the baby monitor feature by
pressing #0.
Answer the call.
If you want to respond from your monitoring
phone, press #1 using tone dialing.
You can turn off the baby monitor feature by
pressing #0.
Note:
R The unit disconnects the call automatically
R The unit disconnects the call automatically
after 2 minutes.
Other programming
Changing the handset name
The default handset name is “Handset 1” to
“Handset 6”. You can customize the name of
each handset (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between handsets.
To display the handset name in standby mode,
turn on the handset name display feature
(page 48).
“Handset 6”. You can customize the name of
each handset (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between handsets.
To display the handset name in standby mode,
turn on the handset name display feature
(page 48).
Handset
1
MMENUN#104
2
Enter the desired name (max. 10 characters).
3
MSAVEN a MOFFN
For assistance, please visit http://shop.panasonic.com/support
47
Programming
TGF38x_OI(en-en)_0721_ver110.pdf 47
2015/07/22 13:36:13