Panasonic KXFC235E Operating Guide
11. Help
89
11.2 Error messages – Base unit display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display
Cause and Solution
“
CALL SERVICE”
L
There is something wrong with the unit. Contact our service
personnel.
personnel.
“
CHECK DOCUMENT”
L
The document was not fed into the unit properly. Re-insert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (page 102) and try again.
document. If misfeeding occurs frequently, clean the document
feeder rollers (page 102) and try again.
L
Attempted to send a document longer than 600 mm. Press
{
{
STOP} to remove the document. Divide the document into two or
more sheets and try again.
“
CHECK FILM”
L
The ink film is empty. Replace the ink film with a new one (page
18).
18).
L
The ink film is not installed. Install it (page 16).
L
The ink film is slack or creased. Tighten it (see step 5 on page 17).
“
CHECK MEMORY”
L
Memory (telephone numbers, parameters, etc.) has been erased.
Re-program.
Re-program.
“
CHECK PAPER”
L
Recording paper is not installed or the unit has run out of paper.
Install paper and press {START} to clear the message.
Install paper and press {START} to clear the message.
L
The recording paper was not fed into the unit properly (page 100).
Reinstall paper (page 19) and press {START} to clear the
message.
Reinstall paper (page 19) and press {START} to clear the
message.
L
The recording paper has jammed near the recording paper
entrance. Clear the jammed paper (page 98) and press {START}
to clear the message.
entrance. Clear the jammed paper (page 98) and press {START}
to clear the message.
“
COVER OPEN”
L
The back cover is open. Close it.
“
FAX IN MEMORY”
L
The unit has a document in memory. See the other displayed
message instructions to print out the document. For fax memory
capacity, see page 106.
message instructions to print out the document. For fax memory
capacity, see page 106.
“
FAX MEMORY FULL”
L
The memory is full of received documents due to a lack of
recording paper, a lack of ink film or a recording paper jam. Install
paper (page 19), install ink film (page 16) or clear the jammed
paper (page 98).
recording paper, a lack of ink film or a recording paper jam. Install
paper (page 19), install ink film (page 16) or clear the jammed
paper (page 98).
L
When performing memory transmission, the document being
stored exceeded the memory capacity of the unit. Send the entire
document manually.
stored exceeded the memory capacity of the unit. Send the entire
document manually.
“
FILM EMPTY”
L
The ink film is empty. Replace the ink film with a new one (page
18).
18).
L
The ink film is slack. Tighten it (see step 5 on page 17) and install
again.
again.
L
The fax machine is positioned near appliances such as TVs or
speakers which generate an intense magnetic field.
speakers which generate an intense magnetic field.
“
FILM NEAR EMPTY”
L
The remaining ink film is low. Prepare a new ink film (page 11).
“
MEMORY FULL”
L
When making a copy, the document being stored exceeded the
memory capacity of the unit. Press {STOP} to clear the message.
Divide the document into sections.
memory capacity of the unit. Press {STOP} to clear the message.
Divide the document into sections.
FC235E-PFQX2180YA_en.book Page 89 Wednesday, April 27, 2005 4:51 PM