Panasonic KXFLB881E Operating Guide
2. Preparation
20
2.8 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
the top of each page sent.
1
{
MENU} i {#}{1}{0}{3} i {SET}
NO.=
|
2
Enter your fax number, up to 20 digits.
L
To enter a “
+”, press {*}.
L
To enter a space, press {#}.
L
To enter a hyphen, press {RECALL}.
L
To erase a number, press {STOP}.
3
{
SET}
4
Press {MENU} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
number, and make the correction.
L
To erase all numbers, press and hold {STOP}.
2.9 Configuring the unit to access
the LAN
the LAN
You can print documents, scan documents, receive
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
Important:
L
Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
the IP address, subnet mask, and default
gateway.
2.9.1 Setting up automatically with a DHCP
server
server
Your situation:
–
–
When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1
After connecting the LAN cable to the unit and the
computer, connect the mains lead.
computer, connect the mains lead.
L
The IP address, subnet mask, and default
gateway will be set automatically.
gateway will be set automatically.
2
Install Multi-Function Station on the computer that
you want to use it with. See page 21 for details.
you want to use it with. See page 21 for details.
Note:
L
You can connect two or more units and assign IP
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid unnecessary trouble.
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid unnecessary trouble.
2.9.2 Setting up manually
Your situation:
–
–
When your network administrator does not manage
the network with a DHCP server.
the network with a DHCP server.
–
When two or more units are connected to the LAN.
You need to assign an IP address, subnet mask, and
default gateway manually.
default gateway manually.
1
{
MENU} i {#}{5}{0}{0}
DHCP
=ENABLED
[V^]
2
Press {0} to select “
DISABLED” i {SET}
3
Set each item.
For the IP address:
1. Press {5}{0}{1}.
IP ADDRESS
PRESS SET
2. {SET} i Enter the IP address of the unit. i
{
SET}
{
SET}
{
RECALL}
{<}{>}
{
MENU}
{
STOP}
FLB881E-PFQX2796ZA-OI-en.book Page 20 Thursday, September 13, 2007 2:16 PM