Panasonic DPMC210 Operating Guide

Page of 24
1. Introduction and Installation
11
Detailed operating instructions are on the CD-ROM.
1.6 Selecting the operation mode 
(Scan/Copy/Fax/Print)
You can select the desired mode by pressing one of the 
following buttons.
{
Scan}: Select this mode when using the unit as a 
scanner.
{
Copy}: Select this mode when using the unit as a 
copier.
{
Fax}: Select this mode when using the unit as a fax 
machine.
{
Print}: Select this mode when using the unit as a 
printer.
Document Requirements
1.7 Setting the original
1.7.1 Using the scanner glass
1
Open the document cover (
1).
2
Place the document FACE DOWN on the scanner 
glass (
2), aligning the top left of the document with 
the corner to which the m mark points.
3
Close the document cover.
1.7.2 Using the automatic document feeder
1
Insert the document (up to 50 pages) FACE UP into 
the feeder until a single beep is heard.
2
Adjust the width of the document guides (
1) to fit 
the actual size of the document.
Volume
1.8 Adjusting the volume
Important:
L
Before adjusting the volume, set the operation 
mode to fax mode. If the 
{Fax} light is OFF, turn it 
ON by pressing 
{Fax}.
Ringer volume
1. Press {V} or {^} repeatedly to select 
Ringer 
Volume”.
2. Press {<} or {>}.
To turn the ringer OFF
1. Press {V} or {^} repeatedly to select 
Ringer 
Volume”.
2. Press {<} repeatedly to display 
Ringer Off” in 
the status bar.
L
The unit will not ring.
L
To turn the ringer back ON, press {>}.
Monitor volume
1. While using the monitor, press {V} or {^} 
repeatedly to select 
Monitor Volume”.
2. Press {<} or {>}.
Initial Programming
1.9 Date and time
1
{
Menu} i {#}{1}{0}{1} i {Set}
2
Enter the current month/date/year/hour/minute.
2
1
1
MC210-PNQW1312YA-QRG-en.book  Page 11  Thursday, November 13, 2008  4:33 PM